About Hillsgrove Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Hillsgrove: Sullivan County Fire & EMS 154.1300 MHz, narrow FM, 167.9 PL.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Sullivan County channels that also cover Hillsgrove
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sullivan County Fire & EMS | Dispatch F1 / Talkaround F5 | 154.1300 In 150.8050 | 167.9 PL | FMN | WPPA300 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sullivan County Fire & EMS | Repeaters (input varies) F2-F4 / Command F6 | 154.0700 In 159.0750 | 167.9 PL | FMN | WPPA300 |
| Sullivan County Fire & EMS | Fire Operations F7 | 154.3025 | 167.9 PL | FMN | WPMQ547 |
| Sullivan County Fire & EMS | Fire RIT F10 | 158.9325 | 167.9 PL | FMN | WPMQ547 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sullivan County Fire & EMS | Water Supply F8 | 154.3475 | 167.9 PL | FMN | WPMQ547 |
| Sullivan County Fire & EMS | Fire Police F9 | 155.9925 | 167.9 PL | FMN | WPMQ547 |
Nearest trunked radio sites
Distances are measured from the center of Hillsgrove.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Hillsgrove?
We do not have a fire dispatch channel listed specifically for Hillsgrove. The county-level fire dispatch channels in the same county: Sullivan County Fire & EMS 154.1300 MHz, narrow FM, 167.9 PL.
What scanner do I need to listen to fire and EMS in Hillsgrove?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Hillsgrove?
For Hillsgrove, start with the North Mtn (SULL01) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 151.4525, 152.695 MHz. Program a control channel first; the scanner finds the voice channels from it.