Skip to content

East Camden Fire and EMS Frequencies

We do not have frequencies listed specifically for East Camden in Kershaw County, South Carolina yet. Countywide channels for Kershaw County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Camden (Palmetto 800), about 5 miles away.

About East Camden Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers East Camden: Kershaw County Fire 154.3550 MHz, FM, 123.0 PL. County-level ems dispatch that covers East Camden: Kershaw Co. EMS Dispatch 155.7450 MHz, FM, 156.7 PL. Trunked: Palmetto 800, for example Kershaw County Fire talkgroup 23541 (hex 5bf5).

  • 16 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Palmetto 800: 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For East Camden, start with the Camden site of Palmetto 800, about 5 miles away. Its control channels: 853.1, 853.3625 MHz.

Data updated .

Kershaw County channels that also cover East Camden

Fire Dispatch

Fire Dispatch frequencies for Kershaw County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kershaw County FireKershaw County Fire – Dispatch154.3550123.0 PLFMKQX213
Kershaw County FireBuffalo/Mt.Pisgah Fire Department Dispatch155.2650
In 150.7750
123.0 PLFMKNBS878

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Kershaw County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Antioch FD FireAntioch Fire Department153.8300FMWPCG858
Kershaw County FireBuffalo/Mt.Pisgah Fire Department Tactical154.2950156.7 PLFMKQX213
Kershaw County FireKershaw County Fire – Tactical Channel154.3400FMWNDE921
Kershaw County FireKershaw County Fire – Fire Ground158.7450146.2 PLFMKIF820
Kershaw County FireFireground A851.2250100.0 PLFMN—
Kershaw County FireFireground B851.6875100.0 PLFMN—
Kershaw County FireFireground C852.7750100.0 PLFMN—
Kershaw County FireFireground D853.6375100.0 PLFMN—
Kershaw County FireFireground E853.9750100.0 PLFMN—

EMS Dispatch

EMS Dispatch frequencies for Kershaw County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kershaw Co. EMS DispatchKershaw Co. EMS Dispatch155.7450156.7 PLFMKLH985

EMS Tactical

EMS Tactical frequencies for Kershaw County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kershaw Co. EMSKershaw Co. EMS155.2800FMKLH985
Kershaw Co. RescueKershaw Co. Rescue154.1750FMWPGV658

Hospitals & Medical

Hospitals & Medical frequencies for Kershaw County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kershaw Co. EMS HEAR ChannelKershaw Co. EMS HEAR Channel155.3400156.7 PLFMKLH985
Kershaw Co. EMS to KCMC ERKershaw Co. EMS to KCMC ER155.4000156.7 PLFMKLH985

Palmetto 800

Palmetto 800 talkgroups
AgencyDescriptionTalkgroupHexMode
Kershaw County FireFire & EMS Dispatch235415bf5D
Kershaw County FireOperations235435bf7D
Kershaw County FireOperations 1 Major Incidents County235455bf9D
Kershaw County FireFire Administration235465bfaD
Kershaw County FireOperations 4 Routine Fire Responses238515d2bD
Kershaw County FireTactical Major Incidents Camden238815d49D
Kershaw County EMS OldOld EMS Dispatch235655c0dD
Kershaw County EMSKershaw County EMS – Tactical Channel235125bd8D
Kershaw County EMSCamden Water Rescue238845d4cD
Kershaw County EMSOperations 3 Routine EMS Responses239555d93D
Kershaw County HospitalEMS to Hospital235715c13D

Nearest trunked radio sites

Distances are measured from the center of East Camden.

Camden · Palmetto 800
RFSS 2 · Site 80 (hex 50) · about 5 mi away
Control 853.1, 853.3625
Voice 851.7875, 852.2875, 855.1875, 857.2875, 858.2875, 859.2875
Kershaw · Palmetto 800
RFSS 2 · Site 28 (hex 1C) · NAC 1D9 · about 8 mi away
Control 853.4125, 853.9125
Voice 851.575, 852.075, 852.4125, 852.8, 853.1735, 856.0375
Richland County Simulcast · Palmetto 800
RFSS 2 · Site 40 (hex 28) · NAC 1D1 · about 22 mi away
Control 852.5375, 853.0375, 853.5375, 860.3375
Voice 851.0375, 851.5375, 852.0375, 854.0375, 855.7875, 855.9375, 856.2375, 857.2375, 858.2375, 858.7375, 859.3375, 859.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in East Camden?

We do not have a fire dispatch channel listed specifically for East Camden. The county-level fire dispatch channels in the same county: Kershaw County Fire 154.3550 MHz, FM, 123.0 PL.

What frequency does EMS or the ambulance service use in East Camden?

We do not have a EMS dispatch channel listed specifically for East Camden. The county-level EMS dispatch channels in the same county: Kershaw Co. EMS Dispatch 155.7450 MHz, FM, 156.7 PL.

Do fire departments and EMS use a trunked radio system in East Camden?

Yes. The county-level systems that cover East Camden are Fire and EMS talkgroups are listed for Palmetto 800: 11 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in East Camden?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in East Camden?

For East Camden, start with the Camden site of Palmetto 800. Its control channels are 853.1, 853.3625 MHz. Program a control channel first; the scanner finds the voice channels from it.