Skip to content

Cooper Fire and EMS Frequencies

We do not have frequencies listed specifically for Cooper in Aurora County, South Dakota yet. Countywide channels for Aurora County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Stickney (South Dakota State Radio System), about 20 miles away.

About Cooper Fire and EMS Frequencies

Quick answer: Trunked: South Dakota State Radio System, for example Aurora County Fire talkgroup 1162 (hex 48a).

  • Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Cooper, start with the Stickney site of South Dakota State Radio System, about 20 miles away. Its control channels: 155.55, 157.47, 159.045 MHz.

Data updated .

Aurora County channels that also cover Cooper

South Dakota State Radio System

South Dakota State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Aurora County FireAurora County Fire – Fire Ground116248aD

Nearest trunked radio sites

Distances are measured from the center of Cooper.

Stickney · South Dakota State Radio System
RFSS 1 · Site 33 (hex 21) · NAC 470 · about 20 mi away
Control 155.55, 157.47, 159.045
Voice 159.39
Mitchell · South Dakota State Radio System
RFSS 1 · Site 11 (hex B) · NAC 470 · about 29 mi away
Control 159, 159.255, 159.84
Voice 155.64, 156.12, 159.45
Miller · South Dakota State Radio System
RFSS 1 · Site 10 (hex A) · NAC 47A · about 41 mi away
Control 155.58, 159.27
Voice 159.03, 159.465, 160.065
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Cooper?

Yes. The county-level systems that cover Cooper are Fire and EMS talkgroups are listed for South Dakota State Radio System: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Cooper?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Cooper?

For Cooper, start with the Stickney site of South Dakota State Radio System. Its control channels are 155.55, 157.47, 159.045 MHz. Program a control channel first; the scanner finds the voice channels from it.