About Firesteel Fire and EMS Frequencies
Quick answer: Trunked: South Dakota State Radio System, for example Aurora County Fire talkgroup 1162 (hex 48a).
- Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Firesteel, start with the Stickney site of South Dakota State Radio System, about 18 miles away. Its control channels: 155.55, 157.47, 159.045 MHz.
Data updated .
Aurora County channels that also cover Firesteel
South Dakota State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Aurora County Fire | Aurora County Fire – Fire Ground | 1162 | 48a | D |
Nearest trunked radio sites
Distances are measured from the center of Firesteel.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Firesteel?
Yes. The county-level systems that cover Firesteel are Fire and EMS talkgroups are listed for South Dakota State Radio System: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Firesteel?
A trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Firesteel?
For Firesteel, start with the Stickney site of South Dakota State Radio System. Its control channels are 155.55, 157.47, 159.045 MHz. Program a control channel first; the scanner finds the voice channels from it.