About Waldro Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Waldro: Brule County Fire 155.8200 MHz, FM, 156.7 PL. Trunked: South Dakota State Radio System, for example Brule County Fire talkgroup 1127 (hex 467).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Waldro, start with the Stickney site of South Dakota State Radio System, about 29 miles away. Its control channels: 155.55, 157.47, 159.045 MHz.
Data updated .
Brule County channels that also cover Waldro
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brule County Fire | Sheriff, Fire, EMS – Chamberlain | 155.8200 In 153.9350 | 156.7 PL | FM | WNVX751 |
| Brule County Fire | Sheriff, Fire, EMS – Kimball | 155.8200 In 153.9350 | 103.5 PL | FM | WNVX751 |
South Dakota State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Brule County Fire | Brule County Fire – Fire Ground | 1127 | 467 | D |
| Brule County EMS | Brule County EMS – Tactical Channel | 1128 | 468 | D |
Nearest trunked radio sites
Distances are measured from the center of Waldro.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Waldro?
We do not have a fire dispatch channel listed specifically for Waldro. The county-level fire dispatch channels in the same county: Brule County Fire 155.8200 MHz, FM, 156.7 PL.
Do fire departments and EMS use a trunked radio system in Waldro?
Yes. The county-level systems that cover Waldro are Fire and EMS talkgroups are listed for South Dakota State Radio System: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Waldro?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Waldro?
For Waldro, start with the Stickney site of South Dakota State Radio System. Its control channels are 155.55, 157.47, 159.045 MHz. Program a control channel first; the scanner finds the voice channels from it.