About Clark Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Clark: Faulk County Fire 154.3550 MHz, FM, 141.3 PL. County-level ems dispatch that covers Clark: Faulk County EMS 154.3550 MHz, FM, 151.4 PL. Trunked: South Dakota State Radio System, for example Faulk County Fire talkgroup 1204 (hex 4b4).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Clark, start with the Bowdle site of South Dakota State Radio System, about 22 miles away. Its control channels: 159.51, 159.87 MHz.
Data updated .
Faulk County channels that also cover Clark
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Faulk County Fire | Faulk County Fire – Dispatch | 154.3550 In 158.9700 | 141.3 PL | FM | WQBK457 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Faulk County EMS | Faulk County EMS – Dispatch | 154.3550 In 158.9700 | 151.4 PL | FM | WQBK457 |
South Dakota State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Faulk County Fire | Faulk County Fire – Dispatch | 1204 | 4b4 | D |
Nearest trunked radio sites
Distances are measured from the center of Clark.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Clark?
We do not have a fire dispatch channel listed specifically for Clark. The county-level fire dispatch channels in the same county: Faulk County Fire 154.3550 MHz, FM, 141.3 PL.
What frequency does EMS or the ambulance service use in Clark?
We do not have a EMS dispatch channel listed specifically for Clark. The county-level EMS dispatch channels in the same county: Faulk County EMS 154.3550 MHz, FM, 151.4 PL.
Do fire departments and EMS use a trunked radio system in Clark?
Yes. The county-level systems that cover Clark are Fire and EMS talkgroups are listed for South Dakota State Radio System: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Clark?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Clark?
For Clark, start with the Bowdle site of South Dakota State Radio System. Its control channels are 159.51, 159.87 MHz. Program a control channel first; the scanner finds the voice channels from it.