About Pleasant Valley Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Pleasant Valley: Gregory County Fire 154.9800 MHz, FM, 118.8 PL. County-level ems dispatch that covers Pleasant Valley: Gregory County EMS 155.5800 MHz, FM, CSQ.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Gregory County channels that also cover Pleasant Valley
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gregory County Fire | Fire, EMS Civil Defense | 154.9800 In 155.8050 | 118.8 PL | FM | WPUZ213 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gregory County EMS | Bonesteel Ambulance | 155.5800 In 153.9950 | CSQ | FM | WQFI686 |
Nearest trunked radio sites
Distances are measured from the center of Pleasant Valley.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Pleasant Valley?
We do not have a fire dispatch channel listed specifically for Pleasant Valley. The county-level fire dispatch channels in the same county: Gregory County Fire 154.9800 MHz, FM, 118.8 PL.
What frequency does EMS or the ambulance service use in Pleasant Valley?
We do not have a EMS dispatch channel listed specifically for Pleasant Valley. The county-level EMS dispatch channels in the same county: Gregory County EMS 155.5800 MHz, FM, CSQ.
What scanner do I need to listen to fire and EMS in Pleasant Valley?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Pleasant Valley?
For Pleasant Valley, start with the Lake Andes (Radar Hill) site of South Dakota State Radio System. Its control channels are 157.8, 157.92 MHz. Program a control channel first; the scanner finds the voice channels from it.