About Wall Fire and EMS Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
Data updated .
Jackson County channels that also cover Wall
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Green Valley Fire | Green Valley Fire | 151.0700 In 158.8500 | 100.0 PL | FMN | WQIR823 |
Nearest trunked radio sites
Distances are measured from the center of Wall.
Long Valley · South Dakota State Radio System
RFSS 1 · Site 26 (hex 1A) · NAC 470 · about 24 mi away
Control 159.93, 160.2
Voice 156.195, 159.465
Billsburg · South Dakota State Radio System
RFSS 1 · Site 6 (hex 6) · NAC 470 · about 34 mi away
Control 159.18, 159.96
Voice 159.36, 159.66
Wall · South Dakota State Radio System
RFSS 1 · Site 48 (hex 30) · NAC 470 · about 38 mi away
Control 155.535, 157.98, 158.52
Voice 157.83, 158.67
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What scanner do I need to listen to fire and EMS in Wall?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Wall?
For Wall, start with the Long Valley site of South Dakota State Radio System. Its control channels are 159.93, 160.2 MHz. Program a control channel first; the scanner finds the voice channels from it.