About Eva Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Eva: Benton County Fire 154.1000 MHz, narrow FM, 69.3 PL. County-level ems dispatch that covers Eva: Benton County EMS 155.7450 MHz, narrow FM, 664 DPL.
- 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Benton County channels that also cover Eva
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Benton County Fire | Benton County Fire – Main | 154.1000 In 158.9550 | 69.3 PL | FMN | WPUE375 |
| Benton County Fire | Eva Fire – Camden | 154.2350 In 151.1750 | 91.5 PL | FMN Encrypted | WQBB630 |
| Benton County Fire | Eva Fire | 154.2350 In 151.1750 | 162.2 PL | FMN Encrypted | WQBB630 |
| Benton County Fire | Benton County Fire – Dispatch – North | 154.4225 In 150.7970 | 233.6 PL | FMN | WPWI274 |
| Benton County Fire | Benton County Fire – Dispatch – South | 155.1825 In 153.8375 | 233.6 PL | FMN | WPWI274 |
| Benton County Fire | Benton County Fire – Dispatch – Camden | 156.2175 In 151.1000 | FMN | WPWI274 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Benton County Fire | South 40 Fireground | 150.8050 | FMN | WPSH720 | |
| Benton County Fire | South 40 Fire | 154.1600 | FMN | WPSH720 | |
| Benton County Fire | South 40 Fire | 154.3100 | FMN | WPSH720 | |
| Benton County Fire | South 40 Fire – Tactical | 154.4375 | FMN | WPSH720 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Benton County EMS | Rescue Squad | 155.7450 In 150.7750 | 664 DPL | FMN | WPRJ556 |
Nearest trunked radio sites
Distances are measured from the center of Eva.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Eva?
We do not have a fire dispatch channel listed specifically for Eva. The county-level fire dispatch channels in the same county: Benton County Fire 154.1000 MHz, narrow FM, 69.3 PL.
What frequency does EMS or the ambulance service use in Eva?
We do not have a EMS dispatch channel listed specifically for Eva. The county-level EMS dispatch channels in the same county: Benton County EMS 155.7450 MHz, narrow FM, 664 DPL.
What scanner do I need to listen to fire and EMS in Eva?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Eva?
For Eva, start with the Huntingdon site of Tennessee Advanced Communications Network (TACN). Its control channels are 851.0875, 851.3125 MHz. Program a control channel first; the scanner finds the voice channels from it.