Skip to content

Holladay Fire and EMS Frequencies

We do not have frequencies listed specifically for Holladay in Benton County, Tennessee yet. Countywide channels for Benton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Natchez Trace 700 (Lexington) (Tennessee Advanced Communications Network (TACN)), about 10 miles away.

About Holladay Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Holladay: Benton County Fire 154.1000 MHz, narrow FM, 69.3 PL. County-level ems dispatch that covers Holladay: Benton County EMS 155.7450 MHz, narrow FM, 664 DPL.

  • 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Benton County channels that also cover Holladay

Fire Dispatch

Fire Dispatch frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Benton County FireBenton County Fire – Main154.1000
In 158.9550
69.3 PLFMNWPUE375
Benton County FireEva Fire – Camden154.2350
In 151.1750
91.5 PLFMN EncryptedWQBB630
Benton County FireEva Fire154.2350
In 151.1750
162.2 PLFMN EncryptedWQBB630
Benton County FireBenton County Fire – Dispatch – North154.4225
In 150.7970
233.6 PLFMNWPWI274
Benton County FireBenton County Fire – Dispatch – South155.1825
In 153.8375
233.6 PLFMNWPWI274
Benton County FireBenton County Fire – Dispatch – Camden156.2175
In 151.1000
FMNWPWI274

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Benton County FireSouth 40 Fireground150.8050FMNWPSH720
Benton County FireSouth 40 Fire154.1600FMNWPSH720
Benton County FireSouth 40 Fire154.3100FMNWPSH720
Benton County FireSouth 40 Fire – Tactical154.4375FMNWPSH720

EMS Dispatch

EMS Dispatch frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Benton County EMSRescue Squad155.7450
In 150.7750
664 DPLFMNWPRJ556

Nearest trunked radio sites

Distances are measured from the center of Holladay.

Natchez Trace 700 (Lexington) · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 42 (hex 2A) · NAC 2A2 · about 10 mi away
Control 769.50625, 770.30625, 771.16875, 771.50625
Voice 772.19375, 772.45625
Huntingdon · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 51 (hex 33) · about 17 mi away
Control 851.0875, 851.3125
Voice 851.6, 851.85, 852.3125, 852.875
Trezevant · Carroll County Public Safety
Site 5 (hex 5) · about 19 mi away
Voice 856.7375, 857.7375, 858.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Holladay?

We do not have a fire dispatch channel listed specifically for Holladay. The county-level fire dispatch channels in the same county: Benton County Fire 154.1000 MHz, narrow FM, 69.3 PL.

What frequency does EMS or the ambulance service use in Holladay?

We do not have a EMS dispatch channel listed specifically for Holladay. The county-level EMS dispatch channels in the same county: Benton County EMS 155.7450 MHz, narrow FM, 664 DPL.

What scanner do I need to listen to fire and EMS in Holladay?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Holladay?

For Holladay, start with the Natchez Trace 700 (Lexington) site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.50625, 770.30625, 771.16875, 771.50625 MHz. Program a control channel first; the scanner finds the voice channels from it.