Skip to content

Bledsoe County Fire and EMS Frequencies

Bledsoe County in Tennessee has 6 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 1 city and community below for local fire departments and EMS agencies.

About Bledsoe County Fire and EMS Frequencies

Quick answer: Fire dispatch for Bledsoe County: Bledsoe County Fire 155.9625 MHz, narrow FM, 074 DPL. EMS dispatch for Bledsoe County: Bledsoe County EMS 155.2050 MHz, narrow FM, no tone.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Bledsoe County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Bledsoe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bledsoe County FireBledsoe County Fire – Tone-Outs (County Page)155.9625074 DPLFMNWQBD548

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Bledsoe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bledsoe County FireBledsoe County Fire – Fire Ground154.0850100.0 PLFMNWRKX848
Bledsoe County FireFire/Rescue/EMA Operations155.5575
In 159.3825
CC 12 · TG 1977 · SL 1DMRWQBD548
Bledsoe County FireFire/Rescue/EMA Operations155.5575
In 159.3825
CC 12 · TG 1968 · SL 2DMRWQBD548

EMS Dispatch

EMS Dispatch frequencies for Bledsoe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bledsoe County EMSSequatchie Valley EMS – Mutual Aid155.2050FMNWNDQ927
Bledsoe County EMSBledsoe County EMS – Dispatch155.6100
In 154.8900
CC 7 · TG 8 · SL 2DMRWNFX973

Radio system sites in Bledsoe County

Program the control channel first; your scanner finds the voice channels from it.

Southeast Center: TNDOC · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 24 (hex 18)
Control 851.7, 852.0875
Voice 851.2625, 852.3125, 852.65, 852.925, 853.875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Bledsoe County

Common questions

What frequency does the fire department use in Bledsoe County?

Fire dispatch channels listed for Bledsoe County: Bledsoe County Fire 155.9625 MHz, narrow FM, 074 DPL.

What frequency does EMS or the ambulance service use in Bledsoe County?

EMS dispatch channels listed for Bledsoe County: Bledsoe County EMS 155.2050 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Bledsoe County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Bledsoe County?

For Bledsoe County, start with the Southeast Center: TNDOC site of Tennessee Advanced Communications Network (TACN). Its control channels are 851.7, 852.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Bledsoe County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Bledsoe County are marked encrypted.