About Pikeville Fire and EMS Frequencies
Quick answer: Fire dispatch for Pikeville: Pikeville Fire 155.4075 MHz, narrow FM, 306 DPL. County-level ems dispatch that covers Pikeville: Bledsoe County EMS 155.2050 MHz, narrow FM, no tone.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Pikeville conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pikeville Fire | Pikeville Fire – Dispatch | 155.4075 In 150.7825 | 306 DPL | FMN | WPOX948 |
Bledsoe County channels that also cover Pikeville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bledsoe County Fire | Bledsoe County Fire – Tone-Outs (County Page) | 155.9625 | 074 DPL | FMN | WQBD548 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bledsoe County Fire | Bledsoe County Fire – Fire Ground | 154.0850 | 100.0 PL | FMN | WRKX848 |
| Bledsoe County Fire | Fire/Rescue/EMA Operations | 155.5575 In 159.3825 | CC 12 · TG 1977 · SL 1 | DMR | WQBD548 |
| Bledsoe County Fire | Fire/Rescue/EMA Operations | 155.5575 In 159.3825 | CC 12 · TG 1968 · SL 2 | DMR | WQBD548 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bledsoe County EMS | Sequatchie Valley EMS – Mutual Aid | 155.2050 | FMN | WNDQ927 | |
| Bledsoe County EMS | Bledsoe County EMS – Dispatch | 155.6100 In 154.8900 | CC 7 · TG 8 · SL 2 | DMR | WNFX973 |
Nearest trunked radio sites
Distances are measured from the center of Pikeville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Pikeville?
Fire dispatch channels listed for Pikeville: Pikeville Fire 155.4075 MHz, narrow FM, 306 DPL.
What frequency does EMS or the ambulance service use in Pikeville?
We do not have a EMS dispatch channel listed specifically for Pikeville. The county-level EMS dispatch channels in the same county: Bledsoe County EMS 155.2050 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Pikeville?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Pikeville?
For Pikeville, start with the Southeast Center: TNDOC site of Tennessee Advanced Communications Network (TACN). Its control channels are 851.7, 852.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Pikeville fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Pikeville are marked encrypted.