About Decatur Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Decatur: Meigs County Fire 154.0250 MHz, NXDN48, RAN 9.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
Data updated .
Meigs County channels that also cover Decatur
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Meigs County Fire | Meigs County Fire – Dispatch | 154.0250 In 150.8050 | RAN 9 | NXDN48 | KNIS232 |
| Meigs County Fire | Meigs County Fire – Dispatch | 154.0250 In 150.8050 | 192.8 PL | FMN | KNIS232 |
| Meigs County Fire | Meigs County Fire – Dispatch | 154.1750 In 153.8300 | 192.8 PL | FMN | WSW662 |
Nearest trunked radio sites
Distances are measured from the center of Decatur.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Decatur?
We do not have a fire dispatch channel listed specifically for Decatur. The county-level fire dispatch channels in the same county: Meigs County Fire 154.0250 MHz, NXDN48, RAN 9.
What scanner do I need to listen to fire and EMS in Decatur?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Decatur?
For Decatur, start with the No Pone Mountain site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.33125, 771.00625 MHz. Program a control channel first; the scanner finds the voice channels from it.