Skip to content

Dayton Fire and EMS Frequencies

Dayton in Rhea County, Tennessee has 0 conventional frequencies and 2 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Evensville Mountain (Tennessee Advanced Communications Network (TACN)), about 6 miles away.

About Dayton Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Dayton: Rhea County Fire 151.0400 MHz, narrow FM, 110.9 PL. County-level ems dispatch that covers Dayton: Rhea County EMS 453.3000 MHz, narrow FM, no tone. Trunked: Tennessee Advanced Communications Network (TACN), for example TN-Rhea Co-Public Safety talkgroup 7002 (hex 1b5a).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Tennessee Advanced Communications Network (TACN): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Dayton, start with the Evensville Mountain site of Tennessee Advanced Communications Network (TACN), about 6 miles away. Its control channels: 769.10625, 770.30625 MHz.

Data updated .

Dayton trunked talkgroups

Tennessee Advanced Communications Network (TACN)

Tennessee Advanced Communications Network (TACN) talkgroups
AgencyDescriptionTalkgroupHexMode
TN-Rhea Co-Public SafetyDayton Fire – Dispatch70021b5aD
TN-Rhea Co-Public SafetyDayton Fire – Administration70011b59D

Rhea County channels that also cover Dayton

Fire Dispatch

Fire Dispatch frequencies for Rhea County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rhea County FireRhea County Fire – Dispatch (Backup? in-use?)151.0400
In 153.8900
110.9 PLFMNKNAW392

EMS Dispatch

EMS Dispatch frequencies for Rhea County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rhea County EMSRhea County EMS – Control ?? (corrected 7/24)453.3000
In 458.3000
FMNWPWB397

Nearest trunked radio sites

Distances are measured from the center of Dayton.

Evensville Mountain · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 14 (hex E) · NAC 2A1 · about 6 mi away
Control 769.10625, 770.30625
Voice 771.15625, 771.55625, 771.80625
Sale Creek · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 13 (hex D) · NAC 2A6 · about 9 mi away
Control 769.25625, 771.10625
Voice 770.25625, 772.45625, 773.28125, 773.93125, 774.33125, 774.91875
No Pone Mountain · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 15 (hex F) · NAC 2A0 · about 16 mi away
Control 769.33125, 771.00625
Voice 769.68125, 771.33125, 772.24375, 772.68125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Dayton?

We do not have a fire dispatch channel listed specifically for Dayton. The county-level fire dispatch channels in the same county: Rhea County Fire 151.0400 MHz, narrow FM, 110.9 PL.

What frequency does EMS or the ambulance service use in Dayton?

We do not have a EMS dispatch channel listed specifically for Dayton. The county-level EMS dispatch channels in the same county: Rhea County EMS 453.3000 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Dayton?

Yes. Fire and EMS talkgroups are listed for Tennessee Advanced Communications Network (TACN): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Dayton?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Dayton?

For Dayton, start with the Evensville Mountain site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.10625, 770.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Dayton fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Dayton are marked encrypted.