About Flat Top Mountain Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Flat Top Mountain: Hamilton County Fire 154.1600 MHz, narrow FM, 156.7 PL. County-level ems dispatch that covers Flat Top Mountain: Hamilton County EMS 156.0450 MHz, narrow FM, 074 DPL. Trunked: Tennessee Advanced Communications Network (TACN), for example TN-Hamilton Co-Municipalities talkgroup 1457 (hex 5b1).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Tennessee Advanced Communications Network (TACN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Flat Top Mountain, start with the Soddy-Daisy site of Tennessee Advanced Communications Network (TACN), about 6 miles away. Its control channels: 770.80625 MHz.
Data updated .
Flat Top Mountain trunked talkgroups
Tennessee Advanced Communications Network (TACN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| TN-Hamilton Co-Municipalities | Flat Top Mountain Fire – Tactical | 1457 | 5b1 | T |
Hamilton County channels that also cover Flat Top Mountain
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hamilton County Fire | EOC (West Transmitter / Signal Mountain) | 154.1600 | 156.7 PL | FMN | WXT533 |
| Hamilton County Fire | EOC (East Transmitter / White Oak Mountain) | 154.1600 | 136.5 PL | FMN | WXT533 |
| Hamilton County Fire | Tri-Community Fire – Main | 154.3550 | RAN 5 | NXDN48 | WQBH303 |
| Hamilton County Fire | Sale Creek Fire | 154.4000 | 136.5 PL | FMN | WYC619 |
| Hamilton County Fire | Tri-Community Fire – Dispatch | 155.9400 | RAN 5 | NXDN48 | WQBH303 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hamilton County Fire | Chattanooga-Hamilton County Rescue Service (Channel 1) | 155.2950 | 136.5 PL | FMN | KNCY658 |
| Hamilton County Fire | Chattanooga-Hamilton County Rescue Service (Channel 2) | 156.2400 | 136.5 PL | FMN | KNCY658 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hamilton County EMS | Chattanooga-Hamilton County Rescue Squad | 156.0450 In 159.1050 | 074 DPL | FMN | WPYZ428 |
Nearest trunked radio sites
Distances are measured from the center of Flat Top Mountain.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Flat Top Mountain?
We do not have a fire dispatch channel listed specifically for Flat Top Mountain. The county-level fire dispatch channels in the same county: Hamilton County Fire 154.1600 MHz, narrow FM, 156.7 PL.
What frequency does EMS or the ambulance service use in Flat Top Mountain?
We do not have a EMS dispatch channel listed specifically for Flat Top Mountain. The county-level EMS dispatch channels in the same county: Hamilton County EMS 156.0450 MHz, narrow FM, 074 DPL.
Do fire departments and EMS use a trunked radio system in Flat Top Mountain?
Yes. Fire and EMS talkgroups are listed for Tennessee Advanced Communications Network (TACN): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Flat Top Mountain?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Flat Top Mountain?
For Flat Top Mountain, start with the Soddy-Daisy site of Tennessee Advanced Communications Network (TACN). Its control channels are 770.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Flat Top Mountain fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Flat Top Mountain are marked encrypted.