About Hamilton County Fire and EMS Frequencies
Quick answer: Fire dispatch for Hamilton County: Hamilton County Fire 154.1600 MHz, narrow FM, 156.7 PL. EMS dispatch for Hamilton County: Hamilton County EMS 156.0450 MHz, narrow FM, 074 DPL.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
Data updated .
Hamilton County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hamilton County Fire | EOC (West Transmitter / Signal Mountain) | 154.1600 | 156.7 PL | FMN | WXT533 |
| Hamilton County Fire | EOC (East Transmitter / White Oak Mountain) | 154.1600 | 136.5 PL | FMN | WXT533 |
| Hamilton County Fire | Tri-Community Fire – Main | 154.3550 | RAN 5 | NXDN48 | WQBH303 |
| Hamilton County Fire | Sale Creek Fire | 154.4000 | 136.5 PL | FMN | WYC619 |
| Hamilton County Fire | Tri-Community Fire – Dispatch | 155.9400 | RAN 5 | NXDN48 | WQBH303 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hamilton County Fire | Chattanooga-Hamilton County Rescue Service (Channel 1) | 155.2950 | 136.5 PL | FMN | KNCY658 |
| Hamilton County Fire | Chattanooga-Hamilton County Rescue Service (Channel 2) | 156.2400 | 136.5 PL | FMN | KNCY658 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hamilton County EMS | Chattanooga-Hamilton County Rescue Squad | 156.0450 In 159.1050 | 074 DPL | FMN | WPYZ428 |
Radio system sites in Hamilton County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Hamilton County
Common questions
What frequency does the fire department use in Hamilton County?
Fire dispatch channels listed for Hamilton County: Hamilton County Fire 154.1600 MHz, narrow FM, 156.7 PL.
What frequency does EMS or the ambulance service use in Hamilton County?
EMS dispatch channels listed for Hamilton County: Hamilton County EMS 156.0450 MHz, narrow FM, 074 DPL.
What scanner do I need to listen to fire and EMS in Hamilton County?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Hamilton County?
For Hamilton County, start with the Chattanooga Simulcast site of Tennessee Advanced Communications Network (TACN). Its control channels are 855.2125, 856.2375, 856.7625, 857.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Hamilton County fire and EMS frequencies encrypted?
None of the 8 conventional frequencies listed for Hamilton County are marked encrypted.