Skip to content

Signal Mountain Fire and EMS Frequencies

Signal Mountain in Hamilton County, Tennessee has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Lone Oak (Tennessee Advanced Communications Network (TACN)), about 4 miles away.

About Signal Mountain Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Signal Mountain: Hamilton County Fire 154.1600 MHz, narrow FM, 156.7 PL. County-level ems dispatch that covers Signal Mountain: Hamilton County EMS 156.0450 MHz, narrow FM, 074 DPL. Trunked: Tennessee Advanced Communications Network (TACN), for example TN-Hamilton Co-Municipalities talkgroup 1167 (hex 48f).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Tennessee Advanced Communications Network (TACN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Signal Mountain, start with the Lone Oak site of Tennessee Advanced Communications Network (TACN), about 4 miles away. Its control channels: 769.35625, 769.78125 MHz.

Data updated .

Signal Mountain trunked talkgroups

Tennessee Advanced Communications Network (TACN)

Tennessee Advanced Communications Network (TACN) talkgroups
AgencyDescriptionTalkgroupHexMode
TN-Hamilton Co-MunicipalitiesSignal Mountain Fire – Dispatch116748fT

Hamilton County channels that also cover Signal Mountain

Fire Dispatch

Fire Dispatch frequencies for Hamilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamilton County FireEOC (West Transmitter / Signal Mountain)154.1600156.7 PLFMNWXT533
Hamilton County FireEOC (East Transmitter / White Oak Mountain)154.1600136.5 PLFMNWXT533
Hamilton County FireTri-Community Fire – Main154.3550RAN 5NXDN48WQBH303
Hamilton County FireSale Creek Fire154.4000136.5 PLFMNWYC619
Hamilton County FireTri-Community Fire – Dispatch155.9400RAN 5NXDN48WQBH303

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Hamilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamilton County FireChattanooga-Hamilton County Rescue Service (Channel 1)155.2950136.5 PLFMNKNCY658
Hamilton County FireChattanooga-Hamilton County Rescue Service (Channel 2)156.2400136.5 PLFMNKNCY658

EMS Dispatch

EMS Dispatch frequencies for Hamilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamilton County EMSChattanooga-Hamilton County Rescue Squad156.0450
In 159.1050
074 DPLFMNWPYZ428

Nearest trunked radio sites

Distances are measured from the center of Signal Mountain.

Lone Oak · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 31 (hex 1F) · NAC 2A0 · about 4 mi away
Control 769.35625, 769.78125
Voice 770.08125, 770.90625, 771.48125, 773.05625
Soddy-Daisy · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 76 (hex 4C) · NAC 2A6 · about 12 mi away
Control 770.80625
Voice 771.93125
Jasper · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 32 (hex 20) · NAC 2A3 · about 17 mi away
Control 152.055, 152.115, 152.215
Voice 152.785, 161.8125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Signal Mountain?

We do not have a fire dispatch channel listed specifically for Signal Mountain. The county-level fire dispatch channels in the same county: Hamilton County Fire 154.1600 MHz, narrow FM, 156.7 PL.

What frequency does EMS or the ambulance service use in Signal Mountain?

We do not have a EMS dispatch channel listed specifically for Signal Mountain. The county-level EMS dispatch channels in the same county: Hamilton County EMS 156.0450 MHz, narrow FM, 074 DPL.

Do fire departments and EMS use a trunked radio system in Signal Mountain?

Yes. Fire and EMS talkgroups are listed for Tennessee Advanced Communications Network (TACN): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Signal Mountain?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Signal Mountain?

For Signal Mountain, start with the Lone Oak site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.35625, 769.78125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Signal Mountain fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Signal Mountain are marked encrypted.