About Lone Oak Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Lone Oak: Sequatchie County Fire 154.4300 MHz, narrow FM, no tone.
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 entries are marked expired, so they may no longer be in use.
Data updated .
Sequatchie County channels that also cover Lone Oak
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sequatchie County Fire | Southend Fire – Primary | 154.4300 In 153.8600 | FMN | WPBY353 | |
| Sequatchie County Fire | Sequatchie County Fire – Dispatch – Countywide | 155.5200 In 154.9500 | 100.0 PL | FMN | WNBP932 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sequatchie County Fire Expired: Expired 5/23 | Fredonia Fire – Tactical | 151.0025 | FMN | WQRI387 | |
| Sequatchie County Fire | Cagle Fire – Tactical | 154.0100 | FMN | WPEQ219 | |
| Sequatchie County Fire Expired: Expired 7/15 | County Operations/Fire | 154.0850 In 151.3250 | FMN | WQDB445 | |
| Sequatchie County Fire | Sequatchie County Fire – Lone Oak Tactical | 154.1075 | FMN | WQYC708 | |
| Sequatchie County Fire | Southend Fire – Tactical | 154.1300 | FMN | WPBY353 | |
| Sequatchie County Fire | Lewis Chapel Fire | 154.2050 | FMN | WPHC281 | |
| Sequatchie County Fire | Lewis Chapel Fire | 154.2800 | FMN | WPHC281 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sequatchie County Hospital | Patient Reports | 155.3400 | 88.5 PL | FMN | KNEG678 |
Nearest trunked radio sites
Distances are measured from the center of Lone Oak.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lone Oak?
We do not have a fire dispatch channel listed specifically for Lone Oak. The county-level fire dispatch channels in the same county: Sequatchie County Fire 154.4300 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Lone Oak?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Lone Oak?
For Lone Oak, start with the Lone Oak site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.35625, 769.78125 MHz. Program a control channel first; the scanner finds the voice channels from it.