About Harrison Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Harrison: Hamilton County Fire 154.1600 MHz, narrow FM, 156.7 PL. County-level ems dispatch that covers Harrison: Hamilton County EMS 156.0450 MHz, narrow FM, 074 DPL.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
Data updated .
Hamilton County channels that also cover Harrison
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hamilton County Fire | EOC (West Transmitter / Signal Mountain) | 154.1600 | 156.7 PL | FMN | WXT533 |
| Hamilton County Fire | EOC (East Transmitter / White Oak Mountain) | 154.1600 | 136.5 PL | FMN | WXT533 |
| Hamilton County Fire | Tri-Community Fire – Main | 154.3550 | RAN 5 | NXDN48 | WQBH303 |
| Hamilton County Fire | Sale Creek Fire | 154.4000 | 136.5 PL | FMN | WYC619 |
| Hamilton County Fire | Tri-Community Fire – Dispatch | 155.9400 | RAN 5 | NXDN48 | WQBH303 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hamilton County Fire | Chattanooga-Hamilton County Rescue Service (Channel 1) | 155.2950 | 136.5 PL | FMN | KNCY658 |
| Hamilton County Fire | Chattanooga-Hamilton County Rescue Service (Channel 2) | 156.2400 | 136.5 PL | FMN | KNCY658 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hamilton County EMS | Chattanooga-Hamilton County Rescue Squad | 156.0450 In 159.1050 | 074 DPL | FMN | WPYZ428 |
Nearest trunked radio sites
Distances are measured from the center of Harrison.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Harrison?
We do not have a fire dispatch channel listed specifically for Harrison. The county-level fire dispatch channels in the same county: Hamilton County Fire 154.1600 MHz, narrow FM, 156.7 PL.
What frequency does EMS or the ambulance service use in Harrison?
We do not have a EMS dispatch channel listed specifically for Harrison. The county-level EMS dispatch channels in the same county: Hamilton County EMS 156.0450 MHz, narrow FM, 074 DPL.
What scanner do I need to listen to fire and EMS in Harrison?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Harrison?
For Harrison, start with the Soddy-Daisy site of Tennessee Advanced Communications Network (TACN). Its control channels are 770.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.