Skip to content

Meigs County Fire and EMS Frequencies

Meigs County in Tennessee has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 1 city and community below for local fire departments and EMS agencies.

About Meigs County Fire and EMS Frequencies

Quick answer: Fire dispatch for Meigs County: Meigs County Fire 154.0250 MHz, NXDN48, RAN 9.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.

Data updated .

Meigs County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Meigs County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meigs County FireMeigs County Fire – Dispatch154.0250
In 150.8050
RAN 9NXDN48KNIS232
Meigs County FireMeigs County Fire – Dispatch154.0250
In 150.8050
192.8 PLFMNKNIS232
Meigs County FireMeigs County Fire – Dispatch154.1750
In 153.8300
192.8 PLFMNWSW662

Radio system sites in Meigs County

Program the control channel first; your scanner finds the voice channels from it.

No Pone Mountain · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 15 (hex F) · NAC 2A0
Control 769.33125, 771.00625
Voice 769.68125, 771.33125, 772.24375, 772.68125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Meigs County

Common questions

What frequency does the fire department use in Meigs County?

Fire dispatch channels listed for Meigs County: Meigs County Fire 154.0250 MHz, NXDN48, RAN 9.

What scanner do I need to listen to fire and EMS in Meigs County?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in Meigs County?

For Meigs County, start with the No Pone Mountain site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.33125, 771.00625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Meigs County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Meigs County are marked encrypted.