Skip to content

Doyle Fire and EMS Frequencies

We do not have frequencies listed specifically for Doyle in White County, Tennessee yet. Countywide channels for White County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Sparta (Tennessee Advanced Communications Network (TACN)), about 7 miles away.

About Doyle Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Doyle: White County Fire 154.3400 MHz, narrow FM, no tone. County-level ems dispatch that covers Doyle: White County EMS 155.3850 MHz, DMR, CC 8 · TG 93500 · SL 1.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 4 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

White County channels that also cover Doyle

Fire Dispatch

Fire Dispatch frequencies for White County
AgencyDescriptionFrequency (MHz)ToneModeFCC
White County FireWhite County Fire – Analog Link to DMR154.3400
In 150.7900
FMNWPPY918
White County FireWhite County Fire – Primary155.3850
In 153.7550
CC 8 · TG 931300 · SL 2DMRWPPD517

Fire Ground / Tactical

Fire Ground / Tactical frequencies for White County
AgencyDescriptionFrequency (MHz)ToneModeFCC
White County FireRescue Squad155.7750
In 158.9400
CC 8 · TG 93250 · SL 1DMRWNUW944

EMS Dispatch

EMS Dispatch frequencies for White County
AgencyDescriptionFrequency (MHz)ToneModeFCC
White County EMSWhite County EMS – Dispatch (West; Simulcast w/155.775)155.3850
In 153.7550
CC 8 · TG 93500 · SL 1DMRWPPD517
White County EMSWhite County EMS – Dispatch (South; Simulcast w/155.385)155.7750
In 158.9400
CC 8 · TG 93500 · SL 1DMRWNUW944

Nearest trunked radio sites

Distances are measured from the center of Doyle.

Sparta · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 67 (hex 43) · NAC 2A5 · about 7 mi away
Control 769.75625, 771.83125, 772.15625
Voice 769.15625, 769.50625, 771.40625
Sparta · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 82 (hex 52) · NAC 2A2 · about 7 mi away
Control 769.75625
Southeast Center: TNDOC · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 24 (hex 18) · about 16 mi away
Control 851.7, 852.0875
Voice 851.2625, 852.3125, 852.65, 852.925, 853.875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Doyle?

We do not have a fire dispatch channel listed specifically for Doyle. The county-level fire dispatch channels in the same county: White County Fire 154.3400 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Doyle?

We do not have a EMS dispatch channel listed specifically for Doyle. The county-level EMS dispatch channels in the same county: White County EMS 155.3850 MHz, DMR, CC 8 · TG 93500 · SL 1.

What scanner do I need to listen to fire and EMS in Doyle?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Doyle?

For Doyle, start with the Sparta site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.75625, 771.83125, 772.15625 MHz. Program a control channel first; the scanner finds the voice channels from it.