About McMinnville Fire and EMS Frequencies
Quick answer: Fire dispatch for McMinnville: McMinnville Fire 154.3550 MHz, narrow FM, 143 DPL (backup). County-level ems dispatch that covers McMinnville: Warren County EMS 155.7225 MHz, narrow FM, 732 DPL. Trunked: Tennessee Advanced Communications Network (TACN), for example TN-Warren Co-Public Safety talkgroup 49974 (hex c336).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Tennessee Advanced Communications Network (TACN): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For McMinnville, start with the McMinnville 911 site of Tennessee Advanced Communications Network (TACN), about 3 miles away. Its control channels: 851.1 MHz.
Data updated .
McMinnville conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McMinnville Fire Backup | McMinnville Fire – Dispatch /Operations | 154.3550 In 153.8900 | 143 DPL | FMN | KIM424 |
McMinnville trunked talkgroups
Tennessee Advanced Communications Network (TACN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| TN-Warren Co-Public Safety | McMinnville Fire – Dispatch/Operations | 49974 | c336 | D |
| TN-Warren Co-Public Safety | McMinnville Fire – Operations | 49975 | c337 | D |
Warren County channels that also cover McMinnville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Warren County Fire | Warren County Fire – Paging | 46.5000 | FM | WPXX605 | |
| Warren County Fire | North Warren Fire – Dispatch ? | 154.3700 In 153.9500 | 100.0 PL | FMN | WQV839 |
| Warren County Fire | Warren County Fire – Dispatch | 155.1225 In 153.7925 | 464 DPL | FMN | WPVQ937 |
| Warren County Fire | Centertown Fire – Dispatch | 155.5425 In 151.0625 | FMN | KUX442 | |
| Warren County Fire | Centertown Fire – Remote Links | 453.3625 | FMN | KUX442 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Warren County Fire | Centertown Fire – Secondary | 154.1900 | FMN | KUX442 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Warren County EMS | Warren County EMS – Dispatch | 155.7225 In 153.7625 | 732 DPL | FMN | WQQG750 |
Nearest trunked radio sites
Distances are measured from the center of McMinnville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in McMinnville?
Fire dispatch channels listed for McMinnville: McMinnville Fire 154.3550 MHz, narrow FM, 143 DPL (backup).
What frequency does EMS or the ambulance service use in McMinnville?
We do not have a EMS dispatch channel listed specifically for McMinnville. The county-level EMS dispatch channels in the same county: Warren County EMS 155.7225 MHz, narrow FM, 732 DPL.
Do fire departments and EMS use a trunked radio system in McMinnville?
Yes. Fire and EMS talkgroups are listed for Tennessee Advanced Communications Network (TACN): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in McMinnville?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in McMinnville?
For McMinnville, start with the McMinnville 911 site of Tennessee Advanced Communications Network (TACN). Its control channels are 851.1 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are McMinnville fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for McMinnville are marked encrypted.
Are McMinnville fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for McMinnville are marked encrypted.