Skip to content

Celina Fire and EMS Frequencies

We do not have frequencies listed specifically for Celina in Clay County, Tennessee yet. Countywide channels for Clay County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Standing Stone 800 (Tennessee Advanced Communications Network (TACN)), about 8 miles away.

About Celina Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Celina: Clay County Fire 154.9800 MHz, narrow FM, 91.5 PL. County-level ems dispatch that covers Celina: Clay County EMS 151.0700 MHz, DMR, CC 15 · TG 1400316 · SL 2.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Clay County channels that also cover Celina

Fire Dispatch

Fire Dispatch frequencies for Clay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clay County FireClay County Fire – Dispatch154.9800
In 153.9650
91.5 PLFMNWRG372

EMS Dispatch

EMS Dispatch frequencies for Clay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clay County EMSClay County EMS – Dispatch151.0700
In 156.0750
CC 15 · TG 1400316 · SL 2DMRWQBR330
Clay County EMSClay County EMS – Dispatch155.7000
In 156.1500
CC 15 · TG 1400316 · SL 2DMRWQCE691

Nearest trunked radio sites

Distances are measured from the center of Celina.

Standing Stone 800 · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 74 (hex 4A) · NAC 2A0 · about 8 mi away
Control 856.025, 856.275
Voice 856.725, 856.975, 857.225, 857.725
Standing Stone VHF · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 63 (hex 3F) · NAC 2A0 · about 8 mi away
Control 152.125, 161.8125
Voice 169.6875
Red Boiling Springs (*) · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 56 (hex 38) · about 20 mi away
Control 851.375, 851.75
Voice 852.425, 852.7375, 852.9875, 853.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Celina?

We do not have a fire dispatch channel listed specifically for Celina. The county-level fire dispatch channels in the same county: Clay County Fire 154.9800 MHz, narrow FM, 91.5 PL.

What frequency does EMS or the ambulance service use in Celina?

We do not have a EMS dispatch channel listed specifically for Celina. The county-level EMS dispatch channels in the same county: Clay County EMS 151.0700 MHz, DMR, CC 15 · TG 1400316 · SL 2.

What scanner do I need to listen to fire and EMS in Celina?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Celina?

For Celina, start with the Standing Stone 800 site of Tennessee Advanced Communications Network (TACN). Its control channels are 856.025, 856.275 MHz. Program a control channel first; the scanner finds the voice channels from it.