Skip to content

Hilham Fire and EMS Frequencies

We do not have frequencies listed specifically for Hilham in Overton County, Tennessee yet. Countywide channels for Overton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Standing Stone VHF (Tennessee Advanced Communications Network (TACN)), about 2 miles away.

About Hilham Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Hilham: Overton County Fire 151.0175 MHz, DMR, CC 1 · TG 67999 · SL 1. County-level ems dispatch that covers Hilham: Overton County EMS 154.3250 MHz, DMR, CC 1 · TG 67300 · SL 1.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 4 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Overton County channels that also cover Hilham

Fire Dispatch

Fire Dispatch frequencies for Overton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Overton County FireOverton County Fire – Dispatch151.0175CC 1 · TG 67999 · SL 1DMR—
Overton County FireCounty Fire Dispatch154.0850
In 158.9700
CC 1 · TG 999 · SL 1DMR—
Overton County FireVolunteer Fire154.4300
In 153.8300
131.8 PLFMNWNFP383

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Overton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Overton County FireRescue Squad154.1675
In 155.9925
FMWPRI238

EMS Dispatch

EMS Dispatch frequencies for Overton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Overton County EMSOverton County EMS – Dispatch154.3250
In 151.1000
CC 1 · TG 67300 · SL 1DMRWPQK916
Overton County EMSRescue Operations154.3250
In 151.1000
CC 1 · TG 67399 · SL 2DMRWPQK916

Nearest trunked radio sites

Distances are measured from the center of Hilham.

Standing Stone VHF · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 63 (hex 3F) · NAC 2A0 · about 2 mi away
Control 152.125, 161.8125
Voice 169.6875
Standing Stone 800 · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 74 (hex 4A) · NAC 2A0 · about 2 mi away
Control 856.025, 856.275
Voice 856.725, 856.975, 857.225, 857.725
Twinton VHF · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 64 (hex 40) · NAC 2AE · about 19 mi away
Control 152.115, 152.785
Voice 152.205, 161.925, 169.6625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hilham?

We do not have a fire dispatch channel listed specifically for Hilham. The county-level fire dispatch channels in the same county: Overton County Fire 151.0175 MHz, DMR, CC 1 · TG 67999 · SL 1.

What frequency does EMS or the ambulance service use in Hilham?

We do not have a EMS dispatch channel listed specifically for Hilham. The county-level EMS dispatch channels in the same county: Overton County EMS 154.3250 MHz, DMR, CC 1 · TG 67300 · SL 1.

What scanner do I need to listen to fire and EMS in Hilham?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Hilham?

For Hilham, start with the Standing Stone VHF site of Tennessee Advanced Communications Network (TACN). Its control channels are 152.125, 161.8125 MHz. Program a control channel first; the scanner finds the voice channels from it.