Skip to content

Cumberland County Fire and EMS Frequencies

Cumberland County in Tennessee has 4 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 7 cities and communities below for local fire departments and EMS agencies.

About Cumberland County Fire and EMS Frequencies

Quick answer: Fire dispatch for Cumberland County: Cumberland County Fire 154.4450 MHz, narrow FM, 141.3 PL. EMS dispatch for Cumberland County: Cumberland County EMS 154.2500 MHz, narrow FM, 107.2 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Cumberland County Public Safety: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Cumberland County, start with the Crossville site of Cumberland County Public Safety. Its control channels: 453.65, 460.2125, 460.625 MHz.
  • 5 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Cumberland County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Cumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cumberland County FireCounty Fire Dispatch154.4450
In 154.0700
141.3 PLFMNKXH290

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cumberland County FireCounty Fireground453.3500
In 458.3500
FMNKXH290
Cumberland County FireCounty Fireground453.3750
In 458.3750
FMNKXH290

EMS Dispatch

EMS Dispatch frequencies for Cumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cumberland County EMSRescue Squad154.2500
In 153.9500
107.2 PLFMNWPGS579

Cumberland County trunked talkgroups

Cumberland County Public Safety

System ID 00A

5 encrypted talkgroups (cannot be monitored)
Cumberland County Public Safety encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Cumberland County FireCumberland County Fire – Dispatch400190D Encrypted
Cumberland County FireCumberland County Fire – Fire Ground5001f4D Encrypted
Cumberland County EMSCumberland County EMS – Dispatch200c8D Encrypted
Cumberland County EMSEMS Paging208d0D Encrypted
Cumberland County EMSRescue Squad800320D Encrypted

Radio system sites in Cumberland County

Program the control channel first; your scanner finds the voice channels from it.

Crossville · Cumberland County Public Safety
RFSS 1 · Site 1 (hex 1)
Control 453.65, 460.2125, 460.625
Voice 460.1125
Fairfield Glade · Cumberland County Public Safety
RFSS 1 · Site 2 (hex 2)
Control 460.2875, 460.3625
Voice 460.125
Crab Orchard · Cumberland County Public Safety
RFSS 1 · Site 3 (hex 3)
Control 453.6875, 460.2375, 460.3125
Newton Road · Cumberland County Public Safety
RFSS 1 · Site 4 (hex 4)
Control 460.1875, 460.6125
Voice 453.85
Campbell Junction · Cumberland County Public Safety
RFSS 1 · Site 5 (hex 5)
Control 460.0875, 460.2625, 460.4375
Simulcast · Cumberland County Public Safety
RFSS 10 · Site 10 (hex A) · NAC 00A
Control 460.0875, 460.4375, 460.6125
Voice 453.2375, 453.6125, 453.9
Hinch TDOC · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 33 (hex 21) · NAC 2A3
Control 851.125
Voice 851.65, 852.2625, 852.85, 853.2375, 853.95
Hinch Mountain · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 35 (hex 23) · NAC 2A0
Control 152.095, 152.505
Voice 152.775, 161.8375, 161.9125, 169.575
Cumberland 1.65 (*) · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 65 (hex 41) · NAC 2A4
Control 851.7
Voice 852.0875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Cumberland County

Common questions

What frequency does the fire department use in Cumberland County?

Fire dispatch channels listed for Cumberland County: Cumberland County Fire 154.4450 MHz, narrow FM, 141.3 PL.

What frequency does EMS or the ambulance service use in Cumberland County?

EMS dispatch channels listed for Cumberland County: Cumberland County EMS 154.2500 MHz, narrow FM, 107.2 PL.

Do fire departments and EMS use a trunked radio system in Cumberland County?

Yes. Fire and EMS talkgroups are listed for Cumberland County Public Safety: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Cumberland County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Cumberland County?

For Cumberland County, start with the Crossville site of Cumberland County Public Safety. Its control channels are 453.65, 460.2125, 460.625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Cumberland County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Cumberland County are marked encrypted.

Are Cumberland County fire and EMS talkgroups encrypted?

5 of the 5 talkgroups listed for Cumberland County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.