Skip to content

Crossville Fire and EMS Frequencies

Crossville in Cumberland County, Tennessee has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Cumberland 1.65 (*) (Tennessee Advanced Communications Network (TACN)), about 0 miles away.

About Crossville Fire and EMS Frequencies

Quick answer: Fire dispatch for Crossville: Crossville Fire 154.1900 MHz, narrow FM, 131.8 PL. County-level ems dispatch that covers Crossville: Cumberland County EMS 154.2500 MHz, narrow FM, 107.2 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Cumberland County Public Safety: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Crossville, start with the Cumberland 1.65 (*) site of Tennessee Advanced Communications Network (TACN), about 0 miles away. Its control channels: 851.7 MHz.
  • 5 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Crossville conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Crossville
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crossville FireCrossville Fire – Dispatch154.1900
In 155.8350
131.8 PLFMNKNFQ723

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Crossville
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crossville FireCrossville Fire – Fire Ground155.7075FMNKNFQ723

Cumberland County channels that also cover Crossville

Fire Dispatch

Fire Dispatch frequencies for Cumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cumberland County FireCounty Fire Dispatch154.4450
In 154.0700
141.3 PLFMNKXH290

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cumberland County FireCounty Fireground453.3500
In 458.3500
FMNKXH290
Cumberland County FireCounty Fireground453.3750
In 458.3750
FMNKXH290

EMS Dispatch

EMS Dispatch frequencies for Cumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cumberland County EMSRescue Squad154.2500
In 153.9500
107.2 PLFMNWPGS579

Cumberland County Public Safety

System ID 00A

5 encrypted talkgroups (cannot be monitored)
Cumberland County Public Safety encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Cumberland County FireCumberland County Fire – Dispatch400190D Encrypted
Cumberland County FireCumberland County Fire – Fire Ground5001f4D Encrypted
Cumberland County EMSCumberland County EMS – Dispatch200c8D Encrypted
Cumberland County EMSEMS Paging208d0D Encrypted
Cumberland County EMSRescue Squad800320D Encrypted

Nearest trunked radio sites

Distances are measured from the center of Crossville.

Cumberland 1.65 (*) · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 65 (hex 41) · NAC 2A4 · about 0 mi away
Control 851.7
Voice 852.0875
Hinch Mountain · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 35 (hex 23) · NAC 2A0 · about 0 mi away
Control 152.095, 152.505
Voice 152.775, 161.8375, 161.9125, 169.575
Crossville · Cumberland County Public Safety
RFSS 1 · Site 1 (hex 1) · about 1 mi away
Control 453.65, 460.2125, 460.625
Voice 460.1125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Crossville?

Fire dispatch channels listed for Crossville: Crossville Fire 154.1900 MHz, narrow FM, 131.8 PL.

What frequency does EMS or the ambulance service use in Crossville?

We do not have a EMS dispatch channel listed specifically for Crossville. The county-level EMS dispatch channels in the same county: Cumberland County EMS 154.2500 MHz, narrow FM, 107.2 PL.

Do fire departments and EMS use a trunked radio system in Crossville?

Yes. The county-level systems that cover Crossville are Fire and EMS talkgroups are listed for Cumberland County Public Safety: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Crossville?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Crossville?

For Crossville, start with the Cumberland 1.65 (*) site of Tennessee Advanced Communications Network (TACN). Its control channels are 851.7 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Crossville fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Crossville are marked encrypted.