Skip to content

Yorkville Fire and EMS Frequencies

We do not have frequencies listed specifically for Yorkville in Gibson County, Tennessee yet. Countywide channels for Gibson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Trenton Armory (Tennessee Advanced Communications Network (TACN)), about 14 miles away.

About Yorkville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Yorkville: Gibson County Fire 154.2050 MHz, narrow FM, no tone; Moores Chapel Fire 154.0250 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Yorkville: Gibson County EMS 154.8750 MHz, narrow FM, 69.3 PL; Medlink EMS 152.3525 MHz, DMR, CC 1 · TG 105 · SL 1.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Gibson County channels that also cover Yorkville

Fire Dispatch

Fire Dispatch frequencies for Gibson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gibson County FireGibson County Fire – Dispatch154.2050FMNWRPE351
Gibson County FireGibson County Fire – Dispatch159.1350
In 153.8900
156.7 PLFMNWNQW781
Moores Chapel FireMoores Chapel Fire – Dispatch154.0250
In 151.1975
123.0 PLFMNWQKG308
Moores Chapel FireMoores Chapel Fire – Dispatch453.3375
In 458.3375
FMNWQKG308

EMS Dispatch

EMS Dispatch frequencies for Gibson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gibson County EMSGibson County EMS – Dispatch154.8750
In 159.0300
69.3 PLFMNKNFS540
Gibson County EMSGibson County EMS – Alternate155.2350156.7 PLFMNKNFS540
Medlink EMSMedlink EMS – ALS Dispatch Trenton152.3525
In 157.6125
CC 1 · TG 105 · SL 1DMRWQSV645

Nearest trunked radio sites

Distances are measured from the center of Yorkville.

Trenton Armory · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 21 (hex 15) · NAC 2A6 · about 14 mi away
Control 769.33125, 769.85625
Voice 769.58125, 770.20625, 772.40625, 773.78125
Dyersburg · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 37 (hex 25) · NAC 2AD · about 14 mi away
Control 856.4875, 857.4875, 858.4875, 859.4875
Voice 854.3625, 856.2125
Millsfield · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 35 (hex 23) · NAC 2A6 · about 15 mi away
Control 769.28125, 770.10625, 770.68125
Voice 769.78125, 771.00625, 771.08125, 771.55625, 771.80625, 773.08125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Yorkville?

We do not have a fire dispatch channel listed specifically for Yorkville. The county-level fire dispatch channels in the same county: Gibson County Fire 154.2050 MHz, narrow FM, no tone; Moores Chapel Fire 154.0250 MHz, narrow FM, 123.0 PL.

What frequency does EMS or the ambulance service use in Yorkville?

We do not have a EMS dispatch channel listed specifically for Yorkville. The county-level EMS dispatch channels in the same county: Gibson County EMS 154.8750 MHz, narrow FM, 69.3 PL; Medlink EMS 152.3525 MHz, DMR, CC 1 · TG 105 · SL 1.

What scanner do I need to listen to fire and EMS in Yorkville?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Yorkville?

For Yorkville, start with the Trenton Armory site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.33125, 769.85625 MHz. Program a control channel first; the scanner finds the voice channels from it.