About Kenton Fire and EMS Frequencies
Quick answer: Fire dispatch for Kenton: Kenton Fire 155.6700 MHz, narrow FM, 251 DPL. County-level ems dispatch that covers Kenton: Gibson County EMS 154.8750 MHz, narrow FM, 69.3 PL; Medlink EMS 152.3525 MHz, DMR, CC 1 · TG 105 · SL 1.
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Kenton conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kenton Fire | Kenton Fire – Dispatch | 155.6700 In 151.3925 | 251 DPL | FMN | WQDM488 |
Gibson County channels that also cover Kenton
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gibson County Fire | Gibson County Fire – Dispatch | 154.2050 | FMN | WRPE351 | |
| Gibson County Fire | Gibson County Fire – Dispatch | 159.1350 In 153.8900 | 156.7 PL | FMN | WNQW781 |
| Moores Chapel Fire | Moores Chapel Fire – Dispatch | 154.0250 In 151.1975 | 123.0 PL | FMN | WQKG308 |
| Moores Chapel Fire | Moores Chapel Fire – Dispatch | 453.3375 In 458.3375 | FMN | WQKG308 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gibson County EMS | Gibson County EMS – Dispatch | 154.8750 In 159.0300 | 69.3 PL | FMN | KNFS540 |
| Gibson County EMS | Gibson County EMS – Alternate | 155.2350 | 156.7 PL | FMN | KNFS540 |
| Medlink EMS | Medlink EMS – ALS Dispatch Trenton | 152.3525 In 157.6125 | CC 1 · TG 105 · SL 1 | DMR | WQSV645 |
Nearest trunked radio sites
Distances are measured from the center of Kenton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Kenton?
Fire dispatch channels listed for Kenton: Kenton Fire 155.6700 MHz, narrow FM, 251 DPL.
What frequency does EMS or the ambulance service use in Kenton?
We do not have a EMS dispatch channel listed specifically for Kenton. The county-level EMS dispatch channels in the same county: Gibson County EMS 154.8750 MHz, narrow FM, 69.3 PL; Medlink EMS 152.3525 MHz, DMR, CC 1 · TG 105 · SL 1.
What scanner do I need to listen to fire and EMS in Kenton?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Kenton?
For Kenton, start with the UT Martin site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.15625, 769.53125, 771.08125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Kenton fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Kenton are marked encrypted.