About Martin Fire and EMS Frequencies
Quick answer: Fire dispatch for Martin: Martin Fire 154.4150 MHz, narrow FM, 210.7 PL. County-level ems dispatch that covers Martin: Weakley County EMS 155.3250 MHz, narrow FM, 103.5 PL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Martin conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Martin Fire | Martin Fire – Initial Dispatch (Analog) | 154.4150 In 158.8650 | 210.7 PL | FMN | WNFK791 |
| Martin Fire | Martin Fire – Dispatch Primary | 154.4150 In 158.8650 | CC 1 · TG 105 · SL 1 | DMR | WNFK791 |
| Martin Fire | Martin Fire – Dispatch | 154.4150 In 158.8650 | CC 1 · TG 125 · SL 2 | DMR | WNFK791 |
Weakley County channels that also cover Martin
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Weakley County Fire | Weakley County Fire – Dispatch – Countywide | 154.4450 In 154.1450 | 103.5 PL | FMN | WNWD265 |
| Weakley County Fire | Palmersville Fire | 155.5800 In 159.3900 | 203.5 PL | FMN | WQEA230 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Weakley County EMS | Rescue Squad/EMS – Primary (Martin/Dresden Towers) | 155.3250 In 150.7900 | 103.5 PL | FMN | WQHU255 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Weakley County EMS | Rescue Squad/EMS – Secondary | 155.2200 | 186.2 PL | FMN | WYY982 |
Nearest trunked radio sites
Distances are measured from the center of Martin.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Martin?
Fire dispatch channels listed for Martin: Martin Fire 154.4150 MHz, narrow FM, 210.7 PL.
What frequency does EMS or the ambulance service use in Martin?
We do not have a EMS dispatch channel listed specifically for Martin. The county-level EMS dispatch channels in the same county: Weakley County EMS 155.3250 MHz, narrow FM, 103.5 PL.
What scanner do I need to listen to fire and EMS in Martin?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Martin?
For Martin, start with the UT Martin site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.15625, 769.53125, 771.08125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Martin fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Martin are marked encrypted.