About Lexington Fire and EMS Frequencies
Quick answer: Fire dispatch for Lexington: Lexington Fire 460.6000 MHz, narrow FM, 107.2 PL. County-level ems dispatch that covers Lexington: Henderson County EMS 151.7450 MHz, narrow FM, 91.5 PL.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Lexington conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lexington Fire | Lexington Fire – Pagers (Volunteers) | 460.6000 In 465.6000 | 107.2 PL | FMN | WNKV946 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lexington Fire | Fireground Operations | 465.6250 | FMN | WNKV946 |
Henderson County channels that also cover Lexington
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Henderson County Fire | Henderson County Fire – Dispatch (Countywide) | 154.3250 In 153.8900 | 123.0 PL | FMN | WQAP760 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Henderson County Fire | Henderson County Fire – Tactical Channel /Fireground (Countywide) | 154.0700 | FMN | WQJ901 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Henderson County EMS | Henderson County EMS – Operations | 151.7450 In 159.9000 | 91.5 PL | FMN | WNYY734 |
| Henderson County EMS | Rescue Squad | 158.7525 In 154.2200 | 114.8 PL | FMN | WRAP862 |
Nearest trunked radio sites
Distances are measured from the center of Lexington.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lexington?
Fire dispatch channels listed for Lexington: Lexington Fire 460.6000 MHz, narrow FM, 107.2 PL.
What frequency does EMS or the ambulance service use in Lexington?
We do not have a EMS dispatch channel listed specifically for Lexington. The county-level EMS dispatch channels in the same county: Henderson County EMS 151.7450 MHz, narrow FM, 91.5 PL.
What scanner do I need to listen to fire and EMS in Lexington?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Lexington?
For Lexington, start with the Natchez Trace site of Tennessee Advanced Communications Network (TACN). Its control channels are 152.085, 152.57 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Lexington fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Lexington are marked encrypted.