Skip to content

Huron Fire and EMS Frequencies

We do not have frequencies listed specifically for Huron in Henderson County, Tennessee yet. Countywide channels for Henderson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Natchez Trace (Tennessee Advanced Communications Network (TACN)), about 9 miles away.

About Huron Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Huron: Henderson County Fire 154.3250 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Huron: Henderson County EMS 151.7450 MHz, narrow FM, 91.5 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Henderson County channels that also cover Huron

Fire Dispatch

Fire Dispatch frequencies for Henderson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Henderson County FireHenderson County Fire – Dispatch (Countywide)154.3250
In 153.8900
123.0 PLFMNWQAP760

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Henderson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Henderson County FireHenderson County Fire – Tactical Channel /Fireground (Countywide)154.0700FMNWQJ901

EMS Dispatch

EMS Dispatch frequencies for Henderson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Henderson County EMSHenderson County EMS – Operations151.7450
In 159.9000
91.5 PLFMNWNYY734
Henderson County EMSRescue Squad158.7525
In 154.2200
114.8 PLFMNWRAP862

Nearest trunked radio sites

Distances are measured from the center of Huron.

Natchez Trace · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 25 (hex 19) · NAC 2A0 · about 9 mi away
Control 152.085, 152.57
Voice 169.575
Jackson Shop · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 20 (hex 14) · NAC 2A2 · about 16 mi away
Control 769.08125, 769.75625, 770.03125
Voice 769.43125, 770.53125, 770.93125
Jackson Simulcast · Jackson Public Safety (P25)
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 8B1 · about 17 mi away
Control 857.2625, 858.2625, 859.2625, 860.2625
Voice 856.2625, 856.7625, 857.7625, 858.7625, 859.7625, 860.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Huron?

We do not have a fire dispatch channel listed specifically for Huron. The county-level fire dispatch channels in the same county: Henderson County Fire 154.3250 MHz, narrow FM, 123.0 PL.

What frequency does EMS or the ambulance service use in Huron?

We do not have a EMS dispatch channel listed specifically for Huron. The county-level EMS dispatch channels in the same county: Henderson County EMS 151.7450 MHz, narrow FM, 91.5 PL.

What scanner do I need to listen to fire and EMS in Huron?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Huron?

For Huron, start with the Natchez Trace site of Tennessee Advanced Communications Network (TACN). Its control channels are 152.085, 152.57 MHz. Program a control channel first; the scanner finds the voice channels from it.