Skip to content

Enville Fire and EMS Frequencies

We do not have frequencies listed specifically for Enville in McNairy County, Tennessee yet. Countywide channels for McNairy County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Bethel Springs (Tennessee Advanced Communications Network (TACN)), about 15 miles away.

Enville also extends into Chester County.

About Enville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Enville: McNairy County Fire 154.1450 MHz, narrow FM, 100.0 PL. County-level ems dispatch that covers Enville: Selmer Medical Center 153.1400 MHz, DMR, CC 2 · TG * · SL 1.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

McNairy County channels that also cover Enville

Fire Dispatch

Fire Dispatch frequencies for McNairy County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McNairy County FireMcNairy County Fire – Dispatch (Countywide)154.1450
In 153.7700
100.0 PLFMNWQCB980

Fire Ground / Tactical

Fire Ground / Tactical frequencies for McNairy County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McNairy County FireMcNairy County Fire – Private/Tactical (Countywide)154.1750FMNWQCB980

EMS Dispatch

EMS Dispatch frequencies for McNairy County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Selmer Medical CenterSelmer Medical Center – BLS South Dispatch (Selmer)153.1400
In 159.6225
CC 2 · TG * · SL 1DMRWQSV645
Selmer Medical CenterSelmer Medical Center – ALS South Dispatch (Pebble Hill)153.2900
In 159.9075
CC 2 · TG 103 · SL 1DMRWQZW221

Nearest trunked radio sites

Distances are measured from the center of Enville.

Bethel Springs · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 27 (hex 1B) · NAC 2A7 · about 15 mi away
Control 769.35625, 769.60625, 771.70625, 773.09375
Voice 770.00625, 773.59375
Savannah · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 26 (hex 1A) · NAC 2A0 · about 15 mi away
Control 152.145, 152.505, 152.785
Natchez Trace · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 25 (hex 19) · NAC 2A0 · about 18 mi away
Control 152.085, 152.57
Voice 169.575
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Enville?

We do not have a fire dispatch channel listed specifically for Enville. The county-level fire dispatch channels in the same county: McNairy County Fire 154.1450 MHz, narrow FM, 100.0 PL.

What frequency does EMS or the ambulance service use in Enville?

We do not have a EMS dispatch channel listed specifically for Enville. The county-level EMS dispatch channels in the same county: Selmer Medical Center 153.1400 MHz, DMR, CC 2 · TG * · SL 1.

What scanner do I need to listen to fire and EMS in Enville?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Enville?

For Enville, start with the Bethel Springs site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.35625, 769.60625, 771.70625, 773.09375 MHz. Program a control channel first; the scanner finds the voice channels from it.