Skip to content

McNairy County Fire and EMS Frequencies

McNairy County in Tennessee has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 12 cities and communities below for local fire departments and EMS agencies.

About McNairy County Fire and EMS Frequencies

Quick answer: Fire dispatch for McNairy County: McNairy County Fire 154.1450 MHz, narrow FM, 100.0 PL. EMS dispatch for McNairy County: Selmer Medical Center 153.1400 MHz, DMR, CC 2 · TG * · SL 1.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

McNairy County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for McNairy County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McNairy County FireMcNairy County Fire – Dispatch (Countywide)154.1450
In 153.7700
100.0 PLFMNWQCB980

Fire Ground / Tactical

Fire Ground / Tactical frequencies for McNairy County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McNairy County FireMcNairy County Fire – Private/Tactical (Countywide)154.1750FMNWQCB980

EMS Dispatch

EMS Dispatch frequencies for McNairy County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Selmer Medical CenterSelmer Medical Center – BLS South Dispatch (Selmer)153.1400
In 159.6225
CC 2 · TG * · SL 1DMRWQSV645
Selmer Medical CenterSelmer Medical Center – ALS South Dispatch (Pebble Hill)153.2900
In 159.9075
CC 2 · TG 103 · SL 1DMRWQZW221

Radio system sites in McNairy County

Program the control channel first; your scanner finds the voice channels from it.

Bethel Springs · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 27 (hex 1B) · NAC 2A7
Control 769.35625, 769.60625, 771.70625, 773.09375
Voice 770.00625, 773.59375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in McNairy County

Common questions

What frequency does the fire department use in McNairy County?

Fire dispatch channels listed for McNairy County: McNairy County Fire 154.1450 MHz, narrow FM, 100.0 PL.

What frequency does EMS or the ambulance service use in McNairy County?

EMS dispatch channels listed for McNairy County: Selmer Medical Center 153.1400 MHz, DMR, CC 2 · TG * · SL 1.

What scanner do I need to listen to fire and EMS in McNairy County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in McNairy County?

For McNairy County, start with the Bethel Springs site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.35625, 769.60625, 771.70625, 773.09375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are McNairy County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for McNairy County are marked encrypted.