About Selmer Fire and EMS Frequencies
Quick answer: Fire dispatch for Selmer: Selmer Fire 155.8275 MHz, narrow FM, 69.3 PL. County-level ems dispatch that covers Selmer: Selmer Medical Center 153.1400 MHz, DMR, CC 2 · TG * · SL 1.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (NXDN48, DMR), which needs a scanner that decodes those modes.
Data updated .
Selmer conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Selmer Fire | Selmer Fire – Dispatch | 155.8275 In 158.8875 | 69.3 PL | FMN | WPUT755 |
| Selmer Fire | Selmer Fire – Dispatch | 155.8275 In 158.8875 | RAN 1 | NXDN48 | WPUT755 |
McNairy County channels that also cover Selmer
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McNairy County Fire | McNairy County Fire – Dispatch (Countywide) | 154.1450 In 153.7700 | 100.0 PL | FMN | WQCB980 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McNairy County Fire | McNairy County Fire – Private/Tactical (Countywide) | 154.1750 | FMN | WQCB980 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Selmer Medical Center | Selmer Medical Center – BLS South Dispatch (Selmer) | 153.1400 In 159.6225 | CC 2 · TG * · SL 1 | DMR | WQSV645 |
| Selmer Medical Center | Selmer Medical Center – ALS South Dispatch (Pebble Hill) | 153.2900 In 159.9075 | CC 2 · TG 103 · SL 1 | DMR | WQZW221 |
Nearest trunked radio sites
Distances are measured from the center of Selmer.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Selmer?
Fire dispatch channels listed for Selmer: Selmer Fire 155.8275 MHz, narrow FM, 69.3 PL.
What frequency does EMS or the ambulance service use in Selmer?
We do not have a EMS dispatch channel listed specifically for Selmer. The county-level EMS dispatch channels in the same county: Selmer Medical Center 153.1400 MHz, DMR, CC 2 · TG * · SL 1.
What scanner do I need to listen to fire and EMS in Selmer?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48, DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Selmer?
For Selmer, start with the Bethel Springs site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.35625, 769.60625, 771.70625, 773.09375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Selmer fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Selmer are marked encrypted.