About Michie Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Michie: McNairy County Fire 154.1450 MHz, narrow FM, 100.0 PL. County-level ems dispatch that covers Michie: Selmer Medical Center 153.1400 MHz, DMR, CC 2 · TG * · SL 1.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Michie conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Michie Fire | Michie Fire – Fire Ground | 154.0250 | FMN | KNJV665 |
McNairy County channels that also cover Michie
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McNairy County Fire | McNairy County Fire – Dispatch (Countywide) | 154.1450 In 153.7700 | 100.0 PL | FMN | WQCB980 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McNairy County Fire | McNairy County Fire – Private/Tactical (Countywide) | 154.1750 | FMN | WQCB980 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Selmer Medical Center | Selmer Medical Center – BLS South Dispatch (Selmer) | 153.1400 In 159.6225 | CC 2 · TG * · SL 1 | DMR | WQSV645 |
| Selmer Medical Center | Selmer Medical Center – ALS South Dispatch (Pebble Hill) | 153.2900 In 159.9075 | CC 2 · TG 103 · SL 1 | DMR | WQZW221 |
Nearest trunked radio sites
Distances are measured from the center of Michie.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Michie?
We do not have a fire dispatch channel listed specifically for Michie. The county-level fire dispatch channels in the same county: McNairy County Fire 154.1450 MHz, narrow FM, 100.0 PL.
What frequency does EMS or the ambulance service use in Michie?
We do not have a EMS dispatch channel listed specifically for Michie. The county-level EMS dispatch channels in the same county: Selmer Medical Center 153.1400 MHz, DMR, CC 2 · TG * · SL 1.
What scanner do I need to listen to fire and EMS in Michie?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Michie?
For Michie, start with the Bethel Springs site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.35625, 769.60625, 771.70625, 773.09375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Michie fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Michie are marked encrypted.