Skip to content

Park City Fire and EMS Frequencies

We do not have frequencies listed specifically for Park City in Lincoln County, Tennessee yet. Countywide channels for Lincoln County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Pulaski (Tennessee Advanced Communications Network (TACN)), about 18 miles away.

About Park City Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Park City: Lincoln County Fire 453.2625 MHz, narrow FM, 179.9 PL. County-level ems dispatch that covers Park City: Lincoln County EMS 154.4000 MHz, narrow FM, 565 DPL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 entry is marked expired, so it may no longer be in use.

Data updated .

Lincoln County channels that also cover Park City

Fire Dispatch

Fire Dispatch frequencies for Lincoln County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lincoln County Fire Expired: Expired 10/13Lincoln County Fire – Dispatch (Old Low Band Net)37.2600FMWPTH347
Lincoln County FireLincoln County Fire – Flintville453.2625
In 458.2625
179.9 PLFMNWPPB325
Lincoln County FireLincoln County Fire – Fayetteville453.3375
In 458.3375
225.7 PLFMNWPPB325
Lincoln County FireLincoln County Fire – Fayetteville/Howell453.7875
In 458.7875
192.8 PLFMNWPPB325
Lincoln County FireLincoln County Fire – Blanche453.8500
In 458.8500
131.8 PLFMNWPPB325

EMS Dispatch

EMS Dispatch frequencies for Lincoln County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lincoln County EMSLincoln County EMS – Dispatch154.4000
In 150.8050
565 DPLFMNWPQA806

Nearest trunked radio sites

Distances are measured from the center of Park City.

Pulaski · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 76 (hex 4C) · about 18 mi away
Control 770.00625
Voice 771.35625, 772.04375, 772.41875, 772.83125, 773.21875
Lynchburg - Old No. 7 · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 77 (hex 4D) · NAC 2A5 · about 19 mi away
Control 852.9625
Voice 851.475, 851.6625, 852.175, 852.3625, 852.675
Hawthorne Hill · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 81 (hex 51) · NAC 2A5 · about 22 mi away
Control 769.54375, 771.04375
Voice 771.38125, 772.43125, 772.96875, 773.94375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Park City?

We do not have a fire dispatch channel listed specifically for Park City. The county-level fire dispatch channels in the same county: Lincoln County Fire 453.2625 MHz, narrow FM, 179.9 PL.

What frequency does EMS or the ambulance service use in Park City?

We do not have a EMS dispatch channel listed specifically for Park City. The county-level EMS dispatch channels in the same county: Lincoln County EMS 154.4000 MHz, narrow FM, 565 DPL.

What scanner do I need to listen to fire and EMS in Park City?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Park City?

For Park City, start with the Pulaski site of Tennessee Advanced Communications Network (TACN). Its control channels are 770.00625 MHz. Program a control channel first; the scanner finds the voice channels from it.