About Elkton Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Elkton: Giles County Fire 154.1375 MHz, narrow FM, 445 DPL. County-level ems dispatch that covers Elkton: Giles County EMS 154.1900 MHz, narrow FM, 233.6 PL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Elkton conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Elkton Fire | Elkton Fire – Local | 154.0700 | FMN | WQBS687 |
Giles County channels that also cover Elkton
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Giles County Fire | Giles County Fire – Dispatch | 154.1375 In 150.7975 | 445 DPL | FMN | WPWZ411 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Giles County EMS | Ambulance Service | 154.1900 In 158.8800 | 233.6 PL | FMN | KTB265 |
Nearest trunked radio sites
Distances are measured from the center of Elkton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Elkton?
We do not have a fire dispatch channel listed specifically for Elkton. The county-level fire dispatch channels in the same county: Giles County Fire 154.1375 MHz, narrow FM, 445 DPL.
What frequency does EMS or the ambulance service use in Elkton?
We do not have a EMS dispatch channel listed specifically for Elkton. The county-level EMS dispatch channels in the same county: Giles County EMS 154.1900 MHz, narrow FM, 233.6 PL.
What scanner do I need to listen to fire and EMS in Elkton?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Elkton?
For Elkton, start with the Pulaski site of Tennessee Advanced Communications Network (TACN). Its control channels are 770.00625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Elkton fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Elkton are marked encrypted.