Skip to content

Lynnville Fire and EMS Frequencies

We do not have frequencies listed specifically for Lynnville in Giles County, Tennessee yet. Countywide channels for Giles County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Pulaski (Tennessee Advanced Communications Network (TACN)), about 12 miles away.

About Lynnville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Lynnville: Giles County Fire 154.1375 MHz, narrow FM, 445 DPL. County-level ems dispatch that covers Lynnville: Giles County EMS 154.1900 MHz, narrow FM, 233.6 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Giles County channels that also cover Lynnville

Fire Dispatch

Fire Dispatch frequencies for Giles County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Giles County FireGiles County Fire – Dispatch154.1375
In 150.7975
445 DPLFMNWPWZ411

EMS Dispatch

EMS Dispatch frequencies for Giles County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Giles County EMSAmbulance Service154.1900
In 158.8800
233.6 PLFMNKTB265

Nearest trunked radio sites

Distances are measured from the center of Lynnville.

Pulaski · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 53 (hex 35) · about 12 mi away
Control 152.145, 152.785
Voice 152.065, 152.505, 169.575
Gills Chapel · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 52 (hex 34) · NAC 2A4 · about 14 mi away
Control 771.23125, 771.75625
Voice 772.25625
Pulaski · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 76 (hex 4C) · about 15 mi away
Control 770.00625
Voice 771.35625, 772.04375, 772.41875, 772.83125, 773.21875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Lynnville?

We do not have a fire dispatch channel listed specifically for Lynnville. The county-level fire dispatch channels in the same county: Giles County Fire 154.1375 MHz, narrow FM, 445 DPL.

What frequency does EMS or the ambulance service use in Lynnville?

We do not have a EMS dispatch channel listed specifically for Lynnville. The county-level EMS dispatch channels in the same county: Giles County EMS 154.1900 MHz, narrow FM, 233.6 PL.

What scanner do I need to listen to fire and EMS in Lynnville?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Lynnville?

For Lynnville, start with the Pulaski site of Tennessee Advanced Communications Network (TACN). Its control channels are 152.145, 152.785 MHz. Program a control channel first; the scanner finds the voice channels from it.