About Mount Pleasant Fire and EMS Frequencies
Quick answer: Fire dispatch for Mount Pleasant: Mount Pleasant Fire 453.7000 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers Mount Pleasant: Maury County EMS 152.2700 MHz, narrow FM, no tone.
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Mount Pleasant conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mount Pleasant Fire | Mount Pleasant Fire – Dispatch | 453.7000 In 458.7000 | 141.3 PL | FMN | KIP690 |
Maury County channels that also cover Mount Pleasant
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Maury County Fire | Emergency Management – County Fire Dispatch | 155.6250 | 107.2 PL | FMN | — |
| Maury County Fire | Maury County Fire – Backup / Interop | 453.0750 In 458.0750 | 192.8 PL | FMN | WPWG336 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Maury County EMS | Moore Care Ambulance Services (Non Emergency Transport) | 152.2700 | FMN | WQBU852 | |
| Maury County EMS | Life Flight Dispatch (VHF) | 153.0000 | 032 DPL | FMN | — |
| Maury County EMS | Maury Regional EMS – Dispatch | 154.2200 | 125 DPL | FMN | WNZB214 |
| Maury County EMS | Life Flight Dispatch (UHF) | 451.2250 | 94.8 PL | FMN | WPRL917 |
| Maury County EMS | Maury Regional EMS – Dispatch (Simulcast 154.220) | 463.0125 | 654 DPL | FMN | — |
Nearest trunked radio sites
Distances are measured from the center of Mount Pleasant.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Mount Pleasant?
Fire dispatch channels listed for Mount Pleasant: Mount Pleasant Fire 453.7000 MHz, narrow FM, 141.3 PL.
What frequency does EMS or the ambulance service use in Mount Pleasant?
We do not have a EMS dispatch channel listed specifically for Mount Pleasant. The county-level EMS dispatch channels in the same county: Maury County EMS 152.2700 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Mount Pleasant?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Mount Pleasant?
For Mount Pleasant, start with the Theta site of Tennessee Advanced Communications Network (TACN). Its control channels are 770.36875, 770.78125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Mount Pleasant fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Mount Pleasant are marked encrypted.