Skip to content

Pulaski Fire and EMS Frequencies

Pulaski in Giles County, Tennessee has 1 conventional frequency and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Pulaski (Tennessee Advanced Communications Network (TACN)), about 0 miles away.

About Pulaski Fire and EMS Frequencies

Quick answer: Fire dispatch for Pulaski: Pulaski Fire 453.3125 MHz, narrow FM, no tone. County-level ems dispatch that covers Pulaski: Giles County EMS 154.1900 MHz, narrow FM, 233.6 PL. Trunked: Tennessee Advanced Communications Network (TACN), for example TN-RMCC Region 6 talkgroup 49532 (hex c17c).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Tennessee Advanced Communications Network (TACN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Pulaski, start with the Pulaski site of Tennessee Advanced Communications Network (TACN), about 0 miles away. Its control channels: 152.145, 152.785 MHz.

Data updated .

Pulaski conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Pulaski
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pulaski FirePulaski Fire – Dispatch453.3125
In 458.3125
FMNWPXG677

Pulaski trunked talkgroups

Tennessee Advanced Communications Network (TACN)

Tennessee Advanced Communications Network (TACN) talkgroups
AgencyDescriptionTalkgroupHexMode
TN-RMCC Region 6EMS Encode – Pulaski49532c17cT

Giles County channels that also cover Pulaski

Fire Dispatch

Fire Dispatch frequencies for Giles County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Giles County FireGiles County Fire – Dispatch154.1375
In 150.7975
445 DPLFMNWPWZ411

EMS Dispatch

EMS Dispatch frequencies for Giles County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Giles County EMSAmbulance Service154.1900
In 158.8800
233.6 PLFMNKTB265

Nearest trunked radio sites

Distances are measured from the center of Pulaski.

Pulaski · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 53 (hex 35) · about 0 mi away
Control 152.145, 152.785
Voice 152.065, 152.505, 169.575
Pulaski · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 76 (hex 4C) · about 9 mi away
Control 770.00625
Voice 771.35625, 772.04375, 772.41875, 772.83125, 773.21875
Gills Chapel · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 52 (hex 34) · NAC 2A4 · about 20 mi away
Control 771.23125, 771.75625
Voice 772.25625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pulaski?

Fire dispatch channels listed for Pulaski: Pulaski Fire 453.3125 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Pulaski?

We do not have a EMS dispatch channel listed specifically for Pulaski. The county-level EMS dispatch channels in the same county: Giles County EMS 154.1900 MHz, narrow FM, 233.6 PL.

Do fire departments and EMS use a trunked radio system in Pulaski?

Yes. Fire and EMS talkgroups are listed for Tennessee Advanced Communications Network (TACN): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Pulaski?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Pulaski?

For Pulaski, start with the Pulaski site of Tennessee Advanced Communications Network (TACN). Its control channels are 152.145, 152.785 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Pulaski fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Pulaski are marked encrypted.

Are Pulaski fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Pulaski are marked encrypted.