About Montgomery County Fire and EMS Frequencies
Quick answer: Fire dispatch for Montgomery County: Montgomery County Fire 453.2875 MHz, narrow FM, 226 DPL (backup). EMS dispatch for Montgomery County: Montgomery County EMS 463.0625 MHz, NXDN96, RAN 32 (backup).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (NXDN96), which needs a scanner that decodes that mode.
Data updated .
Montgomery County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County Fire Backup | Montgomery County Fire – Paging ("F1") Analog | 453.2875 In 458.2875 | 226 DPL | FMN | WQJM415 |
| Montgomery County Fire Backup | Montgomery County Fire – Paging ("F1") | 453.2875 In 458.2875 | RAN 45 | NXDN96 | WQJM415 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County EMS Backup | Montgomery County EMS – Paging /Dispatch | 463.0625 In 468.0625 | RAN 32 | NXDN96 | KWL484 |
| Montgomery County EMS Backup | Montgomery County EMS – Paging /Dispatch Analog | 463.0625 In 468.0625 | 032 DPL | FMN | KWL484 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County EMS | Montgomery County EMS – Rural Repeater | 453.0250 In 458.0250 | 151.4 PL | FMN | KWL484 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County Hospital | Montgomery County Hospital – Patient Reports (H.E.A.R.) | 155.3400 | FMN | KWL484 |
Radio system sites in Montgomery County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Montgomery County
Common questions
What frequency does the fire department use in Montgomery County?
Fire dispatch channels listed for Montgomery County: Montgomery County Fire 453.2875 MHz, narrow FM, 226 DPL (backup).
What frequency does EMS or the ambulance service use in Montgomery County?
EMS dispatch channels listed for Montgomery County: Montgomery County EMS 463.0625 MHz, NXDN96, RAN 32 (backup).
What scanner do I need to listen to fire and EMS in Montgomery County?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN96 is needed for the digital conventional channels.
What are the control channels for trunked radio in Montgomery County?
For Montgomery County, start with the Clarksville Simulcast site of Tennessee Advanced Communications Network (TACN). Its control channels are 851.075, 851.9375, 852.3375, 852.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Montgomery County fire and EMS frequencies encrypted?
None of the 6 conventional frequencies listed for Montgomery County are marked encrypted.