About Clarksville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Clarksville: Montgomery County Fire 453.2875 MHz, narrow FM, 226 DPL (backup). County-level ems dispatch that covers Clarksville: Montgomery County EMS 463.0625 MHz, NXDN96, RAN 32 (backup).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (NXDN96), which needs a scanner that decodes that mode.
Data updated .
Clarksville conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clarksville Fire | Public Works / Street Department | 154.4300 In 154.1600 | 179.9 PL | FMN | WNPE971 |
| Clarksville Fire Backup | Clarksville Fire – Interop w/County Fire | 453.7500 In 458.7500 | FMN | WNAV319 | |
| Clarksville Fire Backup | Clarksville Fire – Interop w/County Fire | 460.5875 In 465.5875 | FMN | WNAV319 | |
| Clarksville Fire Backup | Clarksville Fire – Interop w/County Fire | 460.6375 In 465.6375 | FMN | WNAV319 |
Montgomery County channels that also cover Clarksville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County Fire Backup | Montgomery County Fire – Paging ("F1") Analog | 453.2875 In 458.2875 | 226 DPL | FMN | WQJM415 |
| Montgomery County Fire Backup | Montgomery County Fire – Paging ("F1") | 453.2875 In 458.2875 | RAN 45 | NXDN96 | WQJM415 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County EMS Backup | Montgomery County EMS – Paging /Dispatch | 463.0625 In 468.0625 | RAN 32 | NXDN96 | KWL484 |
| Montgomery County EMS Backup | Montgomery County EMS – Paging /Dispatch Analog | 463.0625 In 468.0625 | 032 DPL | FMN | KWL484 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County EMS | Montgomery County EMS – Rural Repeater | 453.0250 In 458.0250 | 151.4 PL | FMN | KWL484 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County Hospital | Montgomery County Hospital – Patient Reports (H.E.A.R.) | 155.3400 | FMN | KWL484 |
Nearest trunked radio sites
Distances are measured from the center of Clarksville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Clarksville?
We do not have a fire dispatch channel listed specifically for Clarksville. The county-level fire dispatch channels in the same county: Montgomery County Fire 453.2875 MHz, narrow FM, 226 DPL (backup).
What frequency does EMS or the ambulance service use in Clarksville?
We do not have a EMS dispatch channel listed specifically for Clarksville. The county-level EMS dispatch channels in the same county: Montgomery County EMS 463.0625 MHz, NXDN96, RAN 32 (backup).
What scanner do I need to listen to fire and EMS in Clarksville?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN96 is needed for the digital conventional channels.
What are the control channels for trunked radio in Clarksville?
For Clarksville, start with the Clarksville Simulcast site of Tennessee Advanced Communications Network (TACN). Its control channels are 851.075, 851.9375, 852.3375, 852.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Clarksville fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Clarksville are marked encrypted.