About Coopertown Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Coopertown: Robertson County Fire 154.3850 MHz, narrow FM, 131.8 PL. County-level ems dispatch that covers Coopertown: Robertson County EMS 155.2350 MHz, narrow FM, 110.9 PL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
Data updated .
Robertson County channels that also cover Coopertown
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Robertson County Fire | Robertson County Fire – Dispatch (Orlinda Multicast) | 154.3850 | 131.8 PL | FMN | WPIB268 |
| Robertson County Fire Unconfirmed | Robertson County Fire – Dispatch (Greenbriar Multicast) | 154.9800 In 156.0000 | 173.8 PL | FMN | WPMP988 |
| Robertson County Fire | Robertson County Fire – Dispatch (Cross Plains Multicast) | 155.6550 In 153.8000 | 114.8 PL | FMN | KNNJ505 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Robertson County EMS | Robertson County EMS – Dispatch | 155.2350 | 110.9 PL | FMN | KGL631 |
| Robertson County EMS Backup | Robertson County EMS – Dispatch (to trunked System) | 460.6375 In 465.6375 | RAN 21 | NXDN48 | WNAV319 |
Nearest trunked radio sites
Distances are measured from the center of Coopertown.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Coopertown?
We do not have a fire dispatch channel listed specifically for Coopertown. The county-level fire dispatch channels in the same county: Robertson County Fire 154.3850 MHz, narrow FM, 131.8 PL.
What frequency does EMS or the ambulance service use in Coopertown?
We do not have a EMS dispatch channel listed specifically for Coopertown. The county-level EMS dispatch channels in the same county: Robertson County EMS 155.2350 MHz, narrow FM, 110.9 PL.
What scanner do I need to listen to fire and EMS in Coopertown?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Coopertown?
For Coopertown, start with the Springfield site of Tennessee Advanced Communications Network (TACN). Its control channels are 851.7125, 852.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.