About Robertson County Fire and EMS Frequencies
Quick answer: Fire dispatch for Robertson County: Robertson County Fire 154.3850 MHz, narrow FM, 131.8 PL. EMS dispatch for Robertson County: Robertson County EMS 155.2350 MHz, narrow FM, 110.9 PL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
Data updated .
Robertson County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Robertson County Fire | Robertson County Fire – Dispatch (Orlinda Multicast) | 154.3850 | 131.8 PL | FMN | WPIB268 |
| Robertson County Fire Unconfirmed | Robertson County Fire – Dispatch (Greenbriar Multicast) | 154.9800 In 156.0000 | 173.8 PL | FMN | WPMP988 |
| Robertson County Fire | Robertson County Fire – Dispatch (Cross Plains Multicast) | 155.6550 In 153.8000 | 114.8 PL | FMN | KNNJ505 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Robertson County EMS | Robertson County EMS – Dispatch | 155.2350 | 110.9 PL | FMN | KGL631 |
| Robertson County EMS Backup | Robertson County EMS – Dispatch (to trunked System) | 460.6375 In 465.6375 | RAN 21 | NXDN48 | WNAV319 |
Radio system sites in Robertson County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Robertson County
Common questions
What frequency does the fire department use in Robertson County?
Fire dispatch channels listed for Robertson County: Robertson County Fire 154.3850 MHz, narrow FM, 131.8 PL.
What frequency does EMS or the ambulance service use in Robertson County?
EMS dispatch channels listed for Robertson County: Robertson County EMS 155.2350 MHz, narrow FM, 110.9 PL.
What scanner do I need to listen to fire and EMS in Robertson County?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Robertson County?
For Robertson County, start with the E Robertson HS/Cross Plains site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.50625, 771.11875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Robertson County fire and EMS frequencies encrypted?
None of the 5 conventional frequencies listed for Robertson County are marked encrypted.