About Ashland City Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Ashland City: Cheatham County Fire 154.2350 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Ashland City: Cheatham County EMS 155.2650 MHz, narrow FM, 77.0 PL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Cheatham County channels that also cover Ashland City
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cheatham County Fire | Cheatham County Fire – Dispatch – North (Countywide) | 154.2350 In 158.9250 | 146.2 PL | FMN | KNEP954 |
| Cheatham County Fire | Cheatham County Fire – Dispatch – South (Countywide) | 154.8750 In 155.9100 | 218.1 PL | FMN | WPSE797 |
| Cheatham County Fire Expired: Expired | Emergency Management / Two Rivers Fire – Dispatch | 155.8050 In 154.9500 | 146.2 PL | FMN | WPKS952 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cheatham County EMS | Cheatham County EMS – Dispatch | 155.2650 In 159.1050 | 77.0 PL | FMN | WPPZ246 |
Nearest trunked radio sites
Distances are measured from the center of Ashland City.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Ashland City?
We do not have a fire dispatch channel listed specifically for Ashland City. The county-level fire dispatch channels in the same county: Cheatham County Fire 154.2350 MHz, narrow FM, 146.2 PL.
What frequency does EMS or the ambulance service use in Ashland City?
We do not have a EMS dispatch channel listed specifically for Ashland City. The county-level EMS dispatch channels in the same county: Cheatham County EMS 155.2650 MHz, narrow FM, 77.0 PL.
What scanner do I need to listen to fire and EMS in Ashland City?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Ashland City?
For Ashland City, start with the Ashland City site of Tennessee Advanced Communications Network (TACN). Its control channels are 770.33125, 770.83125 MHz. Program a control channel first; the scanner finds the voice channels from it.