Skip to content

Charlotte Fire and EMS Frequencies

Charlotte in Dickson County, Tennessee has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Charlotte (Tennessee Advanced Communications Network (TACN)), about 1 miles away.

About Charlotte Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Charlotte: Dickson County Fire 154.3250 MHz, narrow FM, 127.3 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 entry is marked expired, so it may no longer be in use.

Data updated .

Charlotte conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Charlotte
AgencyDescriptionFrequency (MHz)ToneModeFCC
Charlotte Fire Expired: Expired 6/22Charlotte Fire – Operations453.3250
In 458.3250
192.8 PLFMNWZT982

Dickson County channels that also cover Charlotte

Fire Dispatch

Fire Dispatch frequencies for Dickson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dickson County FireDickson County Fire – North154.3250
In 153.9500
127.3 PLFMNWNRH651
Dickson County FireDickson County Fire – South (w/ Dickson Fire)154.4150
In 153.7700
127.3 PLFMNKWV810

Nearest trunked radio sites

Distances are measured from the center of Charlotte.

Charlotte · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 45 (hex 2D) · NAC 2AC · about 1 mi away
Control 771.00625, 772.00625
Voice 769.96875, 771.38125, 772.43125, 772.95625, 773.70625
Charlotte WT (DIckson) · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 78 (hex 4E) · NAC 2A0 · about 8 mi away
Control 851.2375, 851.6875
Voice 851.925, 852.7, 852.975, 853.7875
Slayden · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 46 (hex 2E) · NAC 2A2 · about 10 mi away
Control 771.25625, 772.35625
Voice 771.55625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Charlotte?

We do not have a fire dispatch channel listed specifically for Charlotte. The county-level fire dispatch channels in the same county: Dickson County Fire 154.3250 MHz, narrow FM, 127.3 PL.

What scanner do I need to listen to fire and EMS in Charlotte?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Charlotte?

For Charlotte, start with the Charlotte site of Tennessee Advanced Communications Network (TACN). Its control channels are 771.00625, 772.00625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Charlotte fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Charlotte are marked encrypted.