Skip to content

Dickson County Fire and EMS Frequencies

Dickson County in Tennessee has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Dickson County Fire and EMS Frequencies

Quick answer: Fire dispatch for Dickson County: Dickson County Fire 154.3250 MHz, narrow FM, 127.3 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Dickson County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Dickson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dickson County FireDickson County Fire – North154.3250
In 153.9500
127.3 PLFMNWNRH651
Dickson County FireDickson County Fire – South (w/ Dickson Fire)154.4150
In 153.7700
127.3 PLFMNKWV810

Radio system sites in Dickson County

Program the control channel first; your scanner finds the voice channels from it.

Charlotte · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 45 (hex 2D) · NAC 2AC
Control 771.00625, 772.00625
Voice 769.96875, 771.38125, 772.43125, 772.95625, 773.70625
Slayden · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 46 (hex 2E) · NAC 2A2
Control 771.25625, 772.35625
Voice 771.55625
Charlotte WT (DIckson) · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 78 (hex 4E) · NAC 2A0
Control 851.2375, 851.6875
Voice 851.925, 852.7, 852.975, 853.7875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Dickson County

Common questions

What frequency does the fire department use in Dickson County?

Fire dispatch channels listed for Dickson County: Dickson County Fire 154.3250 MHz, narrow FM, 127.3 PL.

What scanner do I need to listen to fire and EMS in Dickson County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Dickson County?

For Dickson County, start with the Charlotte site of Tennessee Advanced Communications Network (TACN). Its control channels are 771.00625, 772.00625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Dickson County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Dickson County are marked encrypted.