Skip to content

Burns Fire and EMS Frequencies

Burns in Dickson County, Tennessee has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Charlotte WT (DIckson) (Tennessee Advanced Communications Network (TACN)), about 6 miles away.

About Burns Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Burns: Dickson County Fire 154.3250 MHz, narrow FM, 127.3 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 entry is marked expired, so it may no longer be in use.

Data updated .

Burns conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Burns
AgencyDescriptionFrequency (MHz)ToneModeFCC
Burns Fire Expired: Expired 4/12Burns Fire – Operations154.1300
In 158.8650
127.3 PLFMNWZJ415

Dickson County channels that also cover Burns

Fire Dispatch

Fire Dispatch frequencies for Dickson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dickson County FireDickson County Fire – North154.3250
In 153.9500
127.3 PLFMNWNRH651
Dickson County FireDickson County Fire – South (w/ Dickson Fire)154.4150
In 153.7700
127.3 PLFMNKWV810

Nearest trunked radio sites

Distances are measured from the center of Burns.

Charlotte WT (DIckson) · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 78 (hex 4E) · NAC 2A0 · about 6 mi away
Control 851.2375, 851.6875
Voice 851.925, 852.7, 852.975, 853.7875
Charlotte · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 45 (hex 2D) · NAC 2AC · about 8 mi away
Control 771.00625, 772.00625
Voice 769.96875, 771.38125, 772.43125, 772.95625, 773.70625
Fairview TDOT · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 60 (hex 3C) · NAC 2A0 · about 12 mi away
Control 769.08125, 770.10625
Voice 769.40625, 769.75625, 771.06875, 771.40625, 772.28125, 773.08125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Burns?

We do not have a fire dispatch channel listed specifically for Burns. The county-level fire dispatch channels in the same county: Dickson County Fire 154.3250 MHz, narrow FM, 127.3 PL.

What scanner do I need to listen to fire and EMS in Burns?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Burns?

For Burns, start with the Charlotte WT (DIckson) site of Tennessee Advanced Communications Network (TACN). Its control channels are 851.2375, 851.6875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Burns fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Burns are marked encrypted.