About Pegram Fire and EMS Frequencies
Quick answer: Fire dispatch for Pegram: Pegram Fire 154.4300 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Pegram: Cheatham County EMS 155.2650 MHz, narrow FM, 77.0 PL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Pegram conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pegram Fire | Pegram Fire – Dispatch | 154.4300 In 154.1600 | 146.2 PL | FMN | WZJ413 |
Cheatham County channels that also cover Pegram
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cheatham County Fire | Cheatham County Fire – Dispatch – North (Countywide) | 154.2350 In 158.9250 | 146.2 PL | FMN | KNEP954 |
| Cheatham County Fire | Cheatham County Fire – Dispatch – South (Countywide) | 154.8750 In 155.9100 | 218.1 PL | FMN | WPSE797 |
| Cheatham County Fire Expired: Expired | Emergency Management / Two Rivers Fire – Dispatch | 155.8050 In 154.9500 | 146.2 PL | FMN | WPKS952 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cheatham County EMS | Cheatham County EMS – Dispatch | 155.2650 In 159.1050 | 77.0 PL | FMN | WPPZ246 |
Nearest trunked radio sites
Distances are measured from the center of Pegram.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Pegram?
Fire dispatch channels listed for Pegram: Pegram Fire 154.4300 MHz, narrow FM, 146.2 PL.
What frequency does EMS or the ambulance service use in Pegram?
We do not have a EMS dispatch channel listed specifically for Pegram. The county-level EMS dispatch channels in the same county: Cheatham County EMS 155.2650 MHz, narrow FM, 77.0 PL.
What scanner do I need to listen to fire and EMS in Pegram?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Pegram?
For Pegram, start with the Kingston Spr site of Tennessee Advanced Communications Network (TACN). Its control channels are 771.73125, 772.55625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Pegram fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Pegram are marked encrypted.