About White Bluff Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers White Bluff: Dickson County Fire 154.3250 MHz, narrow FM, 127.3 PL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
White Bluff conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| White Bluff Fire | White Bluff Fire – Operations | 453.9500 In 458.9500 | 192.8 PL | FMN | WNDG962 |
Dickson County channels that also cover White Bluff
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dickson County Fire | Dickson County Fire – North | 154.3250 In 153.9500 | 127.3 PL | FMN | WNRH651 |
| Dickson County Fire | Dickson County Fire – South (w/ Dickson Fire) | 154.4150 In 153.7700 | 127.3 PL | FMN | KWV810 |
Nearest trunked radio sites
Distances are measured from the center of White Bluff.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in White Bluff?
We do not have a fire dispatch channel listed specifically for White Bluff. The county-level fire dispatch channels in the same county: Dickson County Fire 154.3250 MHz, narrow FM, 127.3 PL.
What scanner do I need to listen to fire and EMS in White Bluff?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in White Bluff?
For White Bluff, start with the Kingston Spr site of Tennessee Advanced Communications Network (TACN). Its control channels are 771.73125, 772.55625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are White Bluff fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for White Bluff are marked encrypted.